Consumer Rights Wiki - User contributions [en]

User:Louis/3D-printed firearms and the technical basis for printer mandates

2026-06-07T10:31:49Z

Hellreaver: Added analysis section with additional citations

Every 3D-printed firearm tied to a killing has been a hybrid, a plastic frame bolted to metal barrels and slides bought online; in the academic record, guns printed in full turn up only as seizures, none of them fired.<ref name="forensic" /><ref name="wired" /> The frame is the part that a consumer printer could make, and federal law counts that frame as ''the gun'' even though it holds back none of a fired cartridge's pressure.<ref name="vanderstok" /><ref name="smallarms" /> The metal parts that contain the explosion are not themselves firearms under federal law,<ref name="usc921" /><ref name="oig" /> and they are bought online as ordinary gun parts.<ref name="wired" /> Indeed, 3D-printed components aren't even necessary to create an improvised firearm, as so-called "zip guns" have been known to law enforcement for decades, and consist only of a barrel, firing pin, and a means of actuating the firing pin.<ref>{{Cite web |title=Crypto-boltgun |url=http://www.thegunzone.com/mos/crypto-boltgun.html |archive-url=https://web.archive.org/web/20080613210530/http://www.thegunzone.com/mos/crypto-boltgun.html |archive-date=2008-07-13 |website=The Gun Zone}}</ref> According to chairmanwon, a famous 3D printed gun frame designer, as of April 2nd 2025, "There have been a grand total of 3 [confirmed] shootings with 3D printed guns. 3. Ever. In the history of the [United States]." which are "[Killing of] Brian Thompson, a 2022 non fatal shooting in Albany, New York & a possible 2024 non fatal shooting in Des Moines." <ref>{{Cite web |first=chairmanwon |date=2025-4-02 |title=There have been a grand total of 3 shootings with 3D printed guns. 3. Ever. In the history of the US.

Brian Thompson
a 2022 non fatal shooting in Albany, NY
& a possible 2024 non fatal shooting in Des Moines

This is literally the class of weapon LEAST likely to be used in crime |url=https://x.com/chairmanwon/status/1907117865590751247 |url-status=live |website=twitter}}</ref>

'''[[New York 3D printer blocking technology mandate|New York]] and several other states have answered the spread of printed firearms by regulating 3D printers, only one of the many machines that could be used to make firearm frames but are not capable of producing the necessarily metal parts that contain and direct the explosive pressure of a round that is fundamental to the function of a firearm.'''<ref name="bill-pdf" />

==Governor Hochul and Everytown's case for the mandate==

Governor Kathy Hochul's office announced the FY2027 budget provisions under the banner ''"Advances First-In-The-Nation Law To Crack Down on Illegal Homegrown 3D-Printed Guns,"'' describing the package as ''"cracking down on the scourge of illegal 3D-printed ghost guns and DIY machine guns."''<ref name="gov" /> The release stated that the budget would ''"Require first-in-the-nation minimum safety standards for 3D printers sold in New York to be equipped with basic technology that prevents the unlicensed, illegal production of lethal firearms and firearm parts."''<ref name="gov" />

The gun-safety group Everytown for Gun Safety promoted the budget under the headline ''"New York Shuts Down the 'Plastic Pipeline'"'' and wrote that the state was ''"addressing the 'Plastic Pipeline' head-on."''<ref name="everytown" /> Everytown framed the threat in its own voice: ''"By bypassing traditional background checks with the simple click of a 'print' button, 3D-printed firearms and gun parts are putting the safety of communities across New York at risk."''<ref name="everytown" /> Everytown's president, John Feinblatt, said that ''"it's no surprise that 3D-printed guns and do-it-yourself machine guns are increasingly turning up at New York crime scenes."''<ref name="everytown" />

==What 3D printing can and cannot make==

[[File:CRW-printed-9mm-ammo.jpg|thumb|right|A 9mm Luger cartridge. The Sporting Arms and Ammunition Manufacturers' Institute sets its maximum average pressure at 35,000 pounds per square inch, the force the barrel, chamber, and breech face contain on every shot.<ref name="saami" /> Boxes of 9mm Luger sell for about $16 per 50 rounds.<ref name="vendor-ammo" />]]

A firearm concentrates the force of a fired cartridge in a small set of parts. The Sporting Arms and Ammunition Manufacturers' Institute sets the maximum average pressure for the 9mm Luger cartridge at 35,000 pounds per square inch<ref name="saami" />, or 55,000psi for 5.56mm NATO, a common AR-15 rifle round. The barrel, chamber, bolt or breech face, and slide face need to withstand that pressure for every round fired. The frame or lower receiver, which houses the trigger group and magazine and keeps the metal parts aligned, does not.

[[File:CRW-falsepos-ar15-lower-receiver.jpg|thumb|right|A stripped AR-15 lower receiver, the part a printer makes in a rifle build. The Small Arms Survey describes the lower as aligning the parts and housing the trigger group, while the barrel, bolt, and upper bear the firing stresses.<ref name="smallarms" /> Federal law treats the receiver as the firearm.<ref name="usc921" />]]

The Small Arms Survey, in an assessment of 3D-printed firearm components, described the division of labor inside a typical design: ''"In the AR-15 design, for example, the thermal and mechanical stresses of firing are borne mainly by the barrel, bolt, and upper-receiver assemblies. The lower receiver is primarily intended to ensure the correct alignment and interface of the operating parts of the firearm, and to house the trigger and fire selector and safety mechanisms."''<ref name="smallarms" /> While consumer fused-deposition thermoplastics can make that low-stress frame, even the strongest readily available 3D printable thermoplastics cannot be used to make a barrel or chamber that survives the force of a single centerfire cartridge firing (9,000 PSI printed strength versus 35,000 PSI firing pressure). <ref>{{Cite web |title=PPA-CF |url=https://ca.store.bambulab.com/products/ppa-cf |url-status=live |access-date=2026-06-03 |website=Bambu Lab Webstore}}</ref><ref name="saami" />

For that reason, printed firearms recovered in the field inevitably consists of a printed frame with traditionally-made metal pressure-bearing parts rather than fully 3D-printed parts.

The Combating Terrorism Center at West Point drew the same distinction in its survey of printed firearms used by extremists. It described hybrid designs as weapons that ''"incorporate 3D-printed components with readily available and unregulated components such as steel tubing, metal bar stocks, and springs that are designed to withstand the pressure of a discharge more efficiently and thus generally make for a more reliable and durable firearm."''<ref name="ctc" /> A 2024 study in ''Forensic Science International: Synergy'' that catalogued 186 law enforcement encounters with 3D-printed firearms recorded only 14 involving fully printed guns, and noted that such weapons are ''"considered less reliable and durable."''<ref name="forensic" />

<gallery widths="190" heights="150" caption="Purchased metal parts of an AR-15 hybrid build">
File:CRW-printed-ar15-barrel.jpg|AR-15 barrel in 5.56mm NATO, sold as a commercial component.<ref name="vendor-arbarrel" />
File:CRW-printed-ar15-bcg.jpg|AR-15 bolt carrier group, which locks into the the breech.<ref name="vendor-arbcg" />
File:CRW-printed-ar15-buffer.jpg|The buffer spring, sold for about $4.<ref name="vendor-arbuffer" />
</gallery>

==Mangione's printed frame and purchased metal parts==

[[File:CRW-printed-glock-fieldstrip.jpg|thumb|right|A field-stripped Glock-pattern pistol. A consumer printer makes only the polymer frame, which federal law treats as the firearm.<ref name="vanderstok" /> The slide, barrel, recoil spring assembly, and magazine are bought as finished, unregulated components.<ref name="wired" /><ref name="oig" /> Greenberg's clone cost $200 for the slide and $35 for the barrel;<ref name="wired" /> a complete slide assembly and a magazine sell for about $215 and $14.<ref name="vendor-slide" /><ref name="vendor-mag" />]]
[[File:CRW-printed-fire-control.png|thumb|left|The fire-control parts of a Glock-pattern pistol in a figure from US Patent 4,539,889: the striker, trigger bar, and sear. WIRED's build listed $21 for the trigger components;<ref name="wired" /> a Glock-pattern trigger parts kit sells for about $31.<ref name="vendor-firecontrol" />]]

The firearm allegedly used by Luigi Mangione in the December 4, 2024 killing of UnitedHealthcare chief executive Brian Thompson became the most examined 3D-printed gun in recent reporting. WIRED's Andy Greenberg built and test-fired a clone of it for a May 19, 2025 teardown, and his account itemizes which parts a build like it prints and which it buys.<ref name="wired" />

Greenberg wrote that only the central part is printed: ''"only the central component of a firearm onto which all its other components are attached, known as the lower receiver for an AR-15 or the frame for a Glock-style handgun, is regulated as the gun."''<ref name="wired" /> The pressure-bearing parts were ordered as finished metal components. He listed the cost of the build as ''"$200 for the slide, $35 for the barrel, $21 for the components of the trigger mechanism, and just $650 for a printer,"'' and described ''"the slide and the barrel sitting on the table in front of us, the very gun-like components that actually hold the round and contain the explosive forces that propel a bullet."''<ref name="wired" /> The frame is designed by chairmanwon and is based on a printable Glock-pattern design released by an online group called the Gatalog.<ref name="wired" />

[[File:CRW-printed-carbon-fiber-tube.jpg|thumb|right|A carbon-fiber tube, an ordinary commercial product. Greenberg reported that the printed plastic suppressor had to be reinforced with a carbon-fiber tube before it could be fired.<ref name="wired" /> Such tubes sell for about $38.<ref name="vendor-carbontube" />]]
The printed suppressor needed reinforcement before it could be fired. Greenberg wrote that the plastic suppressor ''"still needed to be epoxied into a carbon-fiber tube for additional reinforcement."''<ref name="wired" /> When he fired the weapon in 9mm, it functioned but cycled poorly, and he attributed the trouble to the purchased slide rather than the printed frame: ''"None of these issues, in other words, had anything to do with the 3D-printed frame."''<ref name="wired" /> The build eventually fired more than 50 rounds.<ref name="wired" />

==Federal firearm definitions and the regulated component==

[[File:CRW-falsepos-glock-17-pistol.png|thumb|right|A Glock pistol. Under 27 CFR § 478.12(a)(1) the polymer frame is the regulated firearm; the barrel and slide carry no such status.<ref name="cfr47812" /><ref name="usc921" />]]

Under federal law the regulated part is the frame or receiver, not the metal parts that contain the firing pressure. Title 18 of the U.S. Code defines a firearm at 18 U.S.C. § 921(a)(3) to include ''"(B) the frame or receiver of any such weapon."''<ref name="usc921" /> The Bureau of Alcohol, Tobacco, Firearms and Explosives defines a handgun frame at 27 CFR § 478.12(a)(1) as ''"the part of a handgun, or variants thereof, that provides housing or a structure for the component (i.e., sear or equivalent) designed to hold back the hammer, striker, bolt, or similar primary energized component prior to initiation of the firing sequence."''<ref name="cfr47812" /> The Supreme Court, upholding the agency's 2022 frame-or-receiver rule in ''Bondi v. VanDerStok'' on March 26, 2025, restated the statutory scheme: ''"Under subsection (B) of §921(a)(3), 'the frame or receiver of any such weapon' covered by subsection (A) is itself treated as a 'firearm.' Effectively, that means a frame or receiver is, even when sold separately, subject to the Act's requirements."''<ref name="vanderstok" />

The barrel and slide carry no such status under those provisions.<ref name="usc921" /><ref name="cfr47812" /> The federal Office of the Inspector General, in an estimate reproduced in California's Assembly Bill 1089 analysis, put the cost of building a printed handgun at ''"around $700"'' for ''"3D printing a 9 millimeter handgun frame and adding unregulated firearm components (such as the barrel, trigger, slide, magazine, etc.)."''<ref name="oig" /> '''The serialized, regulated firearm is the frame the printer makes, while the metal parts that contain the explosion are sold as unregulated components.'''

The Electronic Frontier Foundation argued that a scanning mandate aimed at the printer therefore misses the harder bottleneck, calling the requirement ''"an unfeasible tech solution"'' and campaigning against the New York proposal on the ground that it ''"surveils every print."''<ref name="eff" />

[[File:Glock Gen 5 Parts Diagram.jpg|thumb|In this exploded view, everything except for item number 16 is a non-regulated firearm part.]]

==Hybrid builds versus fully printed guns==

The reporting record distinguishes sharply between fully printed firearms and hybrid builds. The ''Forensic Science International: Synergy'' study recorded that, among its sample, '''the fully printed firearms appeared as seizures rather than as weapons used to wound:''' ''"Cases in which 3D-printed firearms, firearm parts and equipment were recovered by the police and law enforcement services were labelled as Seizure ... No discharged firearms were reported among them."''<ref name="forensic" />

The harm tied to printed firearms runs through hybrids. The Mangione weapon was a hybrid. So was the weaponry used in the October 9, 2019 attack on a synagogue in Halle, Germany; ''The Guardian'' described the attacker's homemade weapons as including ''"some that were 3D-printed."''<ref name="guardian" /><ref name="ctc" /> At the scale of national tracing data, the Department of Justice reported in January 2025 that ''"Between 2017 and 2023, 92,702 suspected PMFs, untraceable 'ghost guns' that are obtained without background checks and do not contain serial numbers, were recovered and reported"'' to the ATF.<ref name="doj-pmf" />

==Conversion devices==

[[File:CRW-falsepos-glock-switch.jpg|thumb|right|Glock-pattern pistols fitted with an auto-sear conversion device, in an ATF image. Federal law defines the device as a machinegun whether or not it is attached to a gun.<ref name="usc5845" />]]

The one category in this area with a large, quantified harm record is the machine-gun conversion device, and it is largely a metal-parts problem rather than a printing problem. Federal law at 26 U.S.C. § 5845(b) defines a machinegun to include ''"any part designed and intended solely and exclusively, or combination of parts designed and intended, for use in converting a weapon into a machinegun,"'' so the device itself is a machinegun whether or not it is attached to a gun.<ref name="usc5845" /> A pistol converter, often called a Glock switch, alters the fire-control geometry so the pistol fires automatically.

The ATF reported in its National Firearms Commerce and Trafficking Assessment that recoveries of conversion devices rose from 814 in the 2012 through 2016 period to 5,454 in 2017 through 2021, a 570 percent increase.<ref name="nfcta" /><ref name="nfcta-news" /> The ''Washington Post'' reported that these devices reach the street through more than one supply chain: ''"The devices can be made of metal or plastic, and authorities believe some are imported from China and sold on the streets. But 3D printers also have been used to make them."''<ref name="wapo" /> A 3D printer is one way to make a conversion device, not a precondition for one. New York's budget reflected the seriousness of this category by making it a class D felony, effective May 31, 2027, for a dealer or gunsmith to sell, transfer, or ship a convertible pistol, under Penal Law § 265.10(10).<ref name="bill-pdf" />

==How broadly the law defines a 3D printer==

New York's statute defines the regulated machine in two prongs, reaching ''"any machine capable of rendering a three-dimensional object from a digital design file using additive manufacturing"'' and ''"any machine capable of making three-dimensional modifications to an object from a digital design file using subtractive manufacturing."''<ref name="bill-pdf" /> Writing in ''Techdirt'', Karl Bode argued that the text as drafted would reach open-source printer firmware projects such as Marlin, Klipper, and RepRap, offline office printers, and CNC milling equipment.<ref name="techdirt" /> The breadth of the regulated category sits opposite the narrowness of what a printer contributes to a working firearm: the non-pressure-bearing frame, the part federal law already regulates.

== Analysis ==
Overall, 3D printing a firearm is a costly process with a steep learning curve. ''"You are essentially becoming a DIY gunsmith,"'' says Dr Rajan Basra. ''"It's not as easy as printing off a sheet of A4 paper in your office printer."''<ref>{{Cite web |last=Hardoon |first=Dan |date=2025-07-18 |title=Print and shoot: How 3D-printed guns are spreading online |url=https://www.bbc.com/news/articles/cvg84rke4ejo |url-status=live |archive-date=2026-06-07}}</ref>. 3D printed firearms come with a variety of misconceptions<ref>{{Cite web |last=Goerdt |first=Mitch |date=2023-12-15 |title=Ghost Guns: Unraveling the Myth and Understanding the Reality |url=https://www.concealedcarry.com/law/ghost-guns-myth-vs-reality/ |url-status=live |access-date=2026-06-07}}</ref> which may or may not contribute to the efforts to restrict 3D printers in this way. 3D printing is not required to produce a "ghost gun", as other methods such as the pipe shotgun<ref>{{Cite web |last=McCarthy |first=Patrick |date=2023-11-23 |title=Building a Pipe Shotgun with the Pop-A 410 DIY Kit |url=https://www.offgridweb.com/survival/building-a-pipe-shotgun-with-the-pop-a-410-diy-kit/ |url-status=live |access-date=2026-06-07}}</ref> are readily available.

==See also==
*[[New York 3D printer blocking technology mandate]]
*[[Right to Repair]]
*[[Digital rights management]]
*[[Digital Millennium Copyright Act]]

==References==
<references>
<ref name="gov">{{Cite web |url=https://www.governor.ny.gov/news/keeping-new-yorkers-safe-governor-hochul-signs-legislation-strengthen-public-safety-and-make |title=Keeping New Yorkers Safe: Governor Hochul Signs Legislation to Strengthen Public Safety |publisher=Office of Governor Kathy Hochul |date=2026-05-27 |access-date=2026-06-01}}</ref>
<ref name="everytown">{{Cite web |url=https://www.everytown.org/press/new-york-shuts-down-the-plastic-pipeline-governor-hochul-and-lawmakers-pass-nation-leading-measures-to-stop-the-spread-of-diy-machine-guns-and-3d-printed-firearms-in-fy27-budget/ |title=New York Shuts Down the 'Plastic Pipeline' |publisher=Everytown for Gun Safety |date=2026-05-21 |access-date=2026-06-01}}</ref>
<ref name="saami">{{Cite web |url=https://www.outdoorlife.com/guns/what-is-p-ammo/ |title=What Is +P Ammo? |author=Outdoor Life staff |publisher=Outdoor Life |date=2021-06-01 |access-date=2026-06-01}} States the SAAMI maximum average pressure of 35,000 psi for the 9mm Luger cartridge.</ref>
<ref name="smallarms">{{Cite web |url=https://www.smallarmssurvey.org/sites/default/files/resources/SAS-OP32-Behind-the-Curve.pdf |title=Behind the Curve: New Technologies, New Control Challenges (Occasional Paper 32) |author=N.R. Jenzen-Jones |publisher=Small Arms Survey |date=2015 |access-date=2026-06-01}}</ref>
<ref name="ctc">{{Cite web |url=https://ctc.westpoint.edu/printing-terror-an-empirical-overview-of-the-use-of-3d-printed-firearms-by-right-wing-extremists/ |title=Printing Terror: An Empirical Overview of the Use of 3D-Printed Firearms by Right-Wing Extremists |publisher=Combating Terrorism Center at West Point |date=2024-06 |access-date=2026-06-01}}</ref>
<ref name="forensic">{{Cite web |url=https://pmc.ncbi.nlm.nih.gov/articles/PMC10998078/ |title=The emergence of 3D printed firearms: a forensic and criminological overview |publisher=Forensic Science International: Synergy |date=2024 |access-date=2026-06-01}}</ref>
<ref name="wired">{{Cite web |url=https://www.wired.com/story/luigi-mangione-ghost-gun-built-tested/ |title=We Built the Ghost Gun Luigi Mangione Allegedly Used, and Tested It |author=Andy Greenberg |publisher=WIRED |date=2025-05-19 |access-date=2026-06-01}}</ref>
<ref name="usc921">{{Cite web |url=https://www.law.cornell.edu/uscode/text/18/921 |title=18 U.S.C. § 921, Definitions |publisher=Legal Information Institute, Cornell Law School |date=2024 |access-date=2026-06-01}}</ref>
<ref name="cfr47812">{{Cite web |url=https://www.ecfr.gov/current/title-27/chapter-II/subchapter-B/part-478/subject-group-ECFR0f9b5e597e57820/section-478.12 |title=27 CFR § 478.12, Definition of frame or receiver |publisher=Code of Federal Regulations |date=2022 |access-date=2026-06-01}}</ref>
<ref name="vanderstok">{{Cite web |url=https://www.supremecourt.gov/opinions/24pdf/23-852_c07d.pdf |title=Bondi v. VanDerStok, No. 23-852 |publisher=Supreme Court of the United States |date=2025-03-26 |access-date=2026-06-01}}</ref>
<ref name="oig">{{Cite web |url=https://apsf.assembly.ca.gov/sites/apsf.assembly.ca.gov/files/AB%201089%20PCA%20Revised%20Version%20Final%20PDF.pdf |title=Assembly Bill 1089 committee analysis (citing U.S. Department of Justice Office of the Inspector General cost estimate) |publisher=California State Assembly Committee on Public Safety |date=2023 |access-date=2026-06-01}}</ref>
<ref name="eff">{{Cite web |url=https://www.eff.org/deeplinks/2026/04/stop-new-yorks-attack-3d-printing |title=Stop New York's Attack on 3D Printing |author=Rory Mir and Nathan Sheard |publisher=Electronic Frontier Foundation |date=2026-04-16 |access-date=2026-06-01}}</ref>
<ref name="guardian">{{Cite web |url=https://www.theguardian.com/lifeandstyle/2024/dec/07/gun-control-is-dead-and-we-killed-it-firearms-that-can-be-printed-at-home |title=Gun control is dead, and we killed it: the rise of firearms that can be printed at home |publisher=The Guardian |date=2024-12-07 |access-date=2026-06-01}}</ref>
<ref name="doj-pmf">{{Cite web |url=https://www.justice.gov/archives/opa/pr/justice-department-announces-atfs-publication-final-volume-national-firearms-commerce-and |title=Justice Department Announces ATF's Publication of the Final Volume of the National Firearms Commerce and Trafficking Assessment |publisher=United States Department of Justice |date=2025-01-16 |access-date=2026-06-01}}</ref>
<ref name="usc5845">{{Cite web |url=https://www.law.cornell.edu/uscode/text/26/5845 |title=26 U.S.C. § 5845, Definitions |publisher=Legal Information Institute, Cornell Law School |date=2024 |access-date=2026-06-01}}</ref>
<ref name="nfcta">{{Cite web |url=https://www.atf.gov/firearms/national-firearms-commerce-and-trafficking-assessment-nfcta-crime-guns-volume-two |title=National Firearms Commerce and Trafficking Assessment (NFCTA): Crime Guns, Volume Two, Part III |publisher=Bureau of Alcohol, Tobacco, Firearms and Explosives |date=2023 |access-date=2026-06-01}}</ref>
<ref name="nfcta-news">{{Cite web |url=https://www.news4jax.com/news/local/2023/02/14/atf-number-of-confiscated-illegal-machine-gun-conversion-devices-jump-570-in-5-years/ |title=ATF: Number of confiscated illegal machine gun conversion devices jump 570% in 5 years |author=Erik Avanier |publisher=News4JAX (WJXT) |date=2023-02-14 |access-date=2026-06-01}} Reports the ATF NFCTA figures of 814 devices confiscated 2012 to 2016 and 5,454 in 2017 to 2021, a 570% increase.</ref>
<ref name="wapo">{{Cite web |url=https://www.washingtonpost.com/dc-md-va/2023/12/06/with-conversion-switch-devices-machine-guns-return-us-streets/ |title=With 'conversion switch' devices, machine guns return to U.S. streets |author=Tom Jackman |publisher=The Washington Post |date=2023-12-06 |archive-url=https://web.archive.org/web/20250723040301/https://www.washingtonpost.com/dc-md-va/2023/12/06/with-conversion-switch-devices-machine-guns-return-us-streets/ |archive-date=2025-07-23 |access-date=2026-06-01}}</ref>
<ref name="bill-pdf">{{Cite web |url=https://assembly.ny.gov/2026budget/2026_bills/enacted/A10005c.pdf |title=Enacted text of A. 10005-C / S. 9005-C, FY2026-2027 budget, Part C |publisher=New York State Assembly |date=2026-05-27 |access-date=2026-06-01}}</ref>
<ref name="techdirt">{{Cite web |url=https://www.techdirt.com/2026/02/19/new-yorks-new-3d-printing-law-as-written-is-extremely-harmful-and-annoying/ |title=New York's New 3D Printing Law, As Written, Is Extremely Harmful And Annoying |author=Karl Bode |publisher=Techdirt |date=2026-02-19 |access-date=2026-06-01}}</ref>
<ref name="vendor-slide">{{Cite web |url=https://www.brownells.com/gun-parts/handgun-parts/handgun-slides-parts/complete-slide-assemblies-for-glock-19/ |title=Complete Slide Assembly With Barrel for Glock 19 |publisher=Brownells |date=2026-06-02 |access-date=2026-06-02}} A complete Glock-pattern slide assembly listed at $214.99 as of June 2, 2026.</ref>
<ref name="vendor-mag">{{Cite web |url=https://www.brownells.com/gun-parts/magazines/handgun-magazines-parts/pmag-gl9-9x19-magazine-for-glock-17/ |title=Magpul PMAG GL9 9mm Magazine for Glock 17 |publisher=Brownells |date=2026-06-02 |access-date=2026-06-02}} A Glock-pattern pistol magazine listed at $14.20 as of June 2, 2026.</ref>
<ref name="vendor-firecontrol">{{Cite web |url=https://www.brownells.com/gun-parts/handgun-parts/handgun-frames-parts/lower-parts-kit-for-glock1719/ |title=Lower Parts Kit for Glock 17/19 |publisher=Brownells |date=2026-06-02 |access-date=2026-06-02}} A Glock-pattern fire-control parts kit listed at $30.99 as of June 2, 2026.</ref>
<ref name="vendor-carbontube">{{Cite web |url=https://dragonplate.com/roll-wrapped-twill-finish-round-tubes |title=Roll Wrapped Twill Finish Round Carbon Fiber Tubes |publisher=DragonPlate |date=2026-06-02 |access-date=2026-06-02}} Commercial carbon-fiber tubes listed from $38.10 as of June 2, 2026.</ref>
<ref name="vendor-ammo">{{Cite web |url=https://sgammo.com/product/9mm-luger-ammo/50-round-box-9mm-luger-124-grain-fmj-sellier-bellot-ammo-sb9b/ |title=50 Round Box 9mm Luger 124 Grain FMJ Sellier and Bellot |publisher=SGAmmo |date=2026-06-02 |access-date=2026-06-02}} A 50-round box of 9mm Luger listed at $15.95 as of June 2, 2026.</ref>
<ref name="vendor-arbarrel">{{Cite web |url=https://www.brownells.com/gun-parts/rifle-parts/rifle-barrels-parts/ |title=Rifle Barrels and Parts |publisher=Brownells |date=2026-06-02 |access-date=2026-06-02}} AR-pattern rifle barrels offered for retail sale as of June 2, 2026.</ref>
<ref name="vendor-arbcg">{{Cite web |url=https://www.brownells.com/gun-parts/rifle-parts/rifle-bolts-bolt-carrier-groups/ |title=Rifle Bolts and Bolt Carrier Groups |publisher=Brownells |date=2026-06-02 |access-date=2026-06-02}} AR-pattern bolt carrier groups offered for retail sale as of June 2, 2026.</ref>
<ref name="vendor-arupper">{{Cite web |url=https://www.brownells.com/gun-parts/rifle-parts/rifle-receivers-parts/ |title=Rifle Receivers and Parts |publisher=Brownells |date=2026-06-02 |access-date=2026-06-02}} AR-15 upper receivers offered for retail sale as of June 2, 2026.</ref>
<ref name="vendor-arbuffer">{{Cite web |url=https://www.brownells.com/gun-parts/rifle-parts/rifle-recoil-parts/ar-15m16-buffer-springs/ |title=AR-15/M16 Buffer Springs |publisher=Brownells |date=2026-06-02 |access-date=2026-06-02}} AR-15 action springs listed from $3.65 as of June 2, 2026.</ref>
<ref name="vendor-steel">{{Cite web |url=https://www.metalsdepot.com/steel-products/steel-round-bar |title=Steel Round Bar |publisher=Metals Depot |date=2026-06-02 |access-date=2026-06-02}} A36 steel round bar stock sold cut to length as of June 2, 2026.</ref>
</references>

User:Louis/3D-printed firearms and the technical basis for printer mandates

2026-06-07T10:17:08Z

Hellreaver:

Every 3D-printed firearm tied to a killing has been a hybrid, a plastic frame bolted to metal barrels and slides bought online; in the academic record, guns printed in full turn up only as seizures, none of them fired.<ref name="forensic" /><ref name="wired" /> The frame is the part that a consumer printer could make, and federal law counts that frame as ''the gun'' even though it holds back none of a fired cartridge's pressure.<ref name="vanderstok" /><ref name="smallarms" /> The metal parts that contain the explosion are not themselves firearms under federal law,<ref name="usc921" /><ref name="oig" /> and they are bought online as ordinary gun parts.<ref name="wired" /> Indeed, 3D-printed components aren't even necessary to create an improvised firearm, as so-called "zip guns" have been known to law enforcement for decades, and consist only of a barrel, firing pin, and a means of actuating the firing pin.<ref>{{Cite web |title=Crypto-boltgun |url=http://www.thegunzone.com/mos/crypto-boltgun.html |archive-url=https://web.archive.org/web/20080613210530/http://www.thegunzone.com/mos/crypto-boltgun.html |archive-date=2008-07-13 |website=The Gun Zone}}</ref> According to chairmanwon, a famous 3D printed gun frame designer, as of April 2nd 2025, "There have been a grand total of 3 [confirmed] shootings with 3D printed guns. 3. Ever. In the history of the [United States]." which are "[Killing of] Brian Thompson, a 2022 non fatal shooting in Albany, New York & a possible 2024 non fatal shooting in Des Moines." <ref>{{Cite web |first=chairmanwon |date=2025-4-02 |title=There have been a grand total of 3 shootings with 3D printed guns. 3. Ever. In the history of the US.

Brian Thompson
a 2022 non fatal shooting in Albany, NY
& a possible 2024 non fatal shooting in Des Moines

This is literally the class of weapon LEAST likely to be used in crime |url=https://x.com/chairmanwon/status/1907117865590751247 |url-status=live |website=twitter}}</ref>

'''[[New York 3D printer blocking technology mandate|New York]] and several other states have answered the spread of printed firearms by regulating 3D printers, only one of the many machines that could be used to make firearm frames but are not capable of producing the necessarily metal parts that contain and direct the explosive pressure of a round that is fundamental to the function of a firearm.'''<ref name="bill-pdf" />

==Governor Hochul and Everytown's case for the mandate==

Governor Kathy Hochul's office announced the FY2027 budget provisions under the banner ''"Advances First-In-The-Nation Law To Crack Down on Illegal Homegrown 3D-Printed Guns,"'' describing the package as ''"cracking down on the scourge of illegal 3D-printed ghost guns and DIY machine guns."''<ref name="gov" /> The release stated that the budget would ''"Require first-in-the-nation minimum safety standards for 3D printers sold in New York to be equipped with basic technology that prevents the unlicensed, illegal production of lethal firearms and firearm parts."''<ref name="gov" />

The gun-safety group Everytown for Gun Safety promoted the budget under the headline ''"New York Shuts Down the 'Plastic Pipeline'"'' and wrote that the state was ''"addressing the 'Plastic Pipeline' head-on."''<ref name="everytown" /> Everytown framed the threat in its own voice: ''"By bypassing traditional background checks with the simple click of a 'print' button, 3D-printed firearms and gun parts are putting the safety of communities across New York at risk."''<ref name="everytown" /> Everytown's president, John Feinblatt, said that ''"it's no surprise that 3D-printed guns and do-it-yourself machine guns are increasingly turning up at New York crime scenes."''<ref name="everytown" />

==What 3D printing can and cannot make==

[[File:CRW-printed-9mm-ammo.jpg|thumb|right|A 9mm Luger cartridge. The Sporting Arms and Ammunition Manufacturers' Institute sets its maximum average pressure at 35,000 pounds per square inch, the force the barrel, chamber, and breech face contain on every shot.<ref name="saami" /> Boxes of 9mm Luger sell for about $16 per 50 rounds.<ref name="vendor-ammo" />]]

A firearm concentrates the force of a fired cartridge in a small set of parts. The Sporting Arms and Ammunition Manufacturers' Institute sets the maximum average pressure for the 9mm Luger cartridge at 35,000 pounds per square inch<ref name="saami" />, or 55,000psi for 5.56mm NATO, a common AR-15 rifle round. The barrel, chamber, bolt or breech face, and slide face need to withstand that pressure for every round fired. The frame or lower receiver, which houses the trigger group and magazine and keeps the metal parts aligned, does not.

[[File:CRW-falsepos-ar15-lower-receiver.jpg|thumb|right|A stripped AR-15 lower receiver, the part a printer makes in a rifle build. The Small Arms Survey describes the lower as aligning the parts and housing the trigger group, while the barrel, bolt, and upper bear the firing stresses.<ref name="smallarms" /> Federal law treats the receiver as the firearm.<ref name="usc921" />]]

The Small Arms Survey, in an assessment of 3D-printed firearm components, described the division of labor inside a typical design: ''"In the AR-15 design, for example, the thermal and mechanical stresses of firing are borne mainly by the barrel, bolt, and upper-receiver assemblies. The lower receiver is primarily intended to ensure the correct alignment and interface of the operating parts of the firearm, and to house the trigger and fire selector and safety mechanisms."''<ref name="smallarms" /> While consumer fused-deposition thermoplastics can make that low-stress frame, even the strongest readily available 3D printable thermoplastics cannot be used to make a barrel or chamber that survives the force of a single centerfire cartridge firing (9,000 PSI printed strength versus 35,000 PSI firing pressure). <ref>{{Cite web |title=PPA-CF |url=https://ca.store.bambulab.com/products/ppa-cf |url-status=live |access-date=2026-06-03 |website=Bambu Lab Webstore}}</ref><ref name="saami" />

For that reason, printed firearms recovered in the field inevitably consists of a printed frame with traditionally-made metal pressure-bearing parts rather than fully 3D-printed parts.

The Combating Terrorism Center at West Point drew the same distinction in its survey of printed firearms used by extremists. It described hybrid designs as weapons that ''"incorporate 3D-printed components with readily available and unregulated components such as steel tubing, metal bar stocks, and springs that are designed to withstand the pressure of a discharge more efficiently and thus generally make for a more reliable and durable firearm."''<ref name="ctc" /> A 2024 study in ''Forensic Science International: Synergy'' that catalogued 186 law enforcement encounters with 3D-printed firearms recorded only 14 involving fully printed guns, and noted that such weapons are ''"considered less reliable and durable."''<ref name="forensic" />

<gallery widths="190" heights="150" caption="Purchased metal parts of an AR-15 hybrid build">
File:CRW-printed-ar15-barrel.jpg|AR-15 barrel in 5.56mm NATO, sold as a commercial component.<ref name="vendor-arbarrel" />
File:CRW-printed-ar15-bcg.jpg|AR-15 bolt carrier group, which locks into the the breech.<ref name="vendor-arbcg" />
File:CRW-printed-ar15-buffer.jpg|The buffer spring, sold for about $4.<ref name="vendor-arbuffer" />
</gallery>

==Mangione's printed frame and purchased metal parts==

[[File:CRW-printed-glock-fieldstrip.jpg|thumb|right|A field-stripped Glock-pattern pistol. A consumer printer makes only the polymer frame, which federal law treats as the firearm.<ref name="vanderstok" /> The slide, barrel, recoil spring assembly, and magazine are bought as finished, unregulated components.<ref name="wired" /><ref name="oig" /> Greenberg's clone cost $200 for the slide and $35 for the barrel;<ref name="wired" /> a complete slide assembly and a magazine sell for about $215 and $14.<ref name="vendor-slide" /><ref name="vendor-mag" />]]
[[File:CRW-printed-fire-control.png|thumb|left|The fire-control parts of a Glock-pattern pistol in a figure from US Patent 4,539,889: the striker, trigger bar, and sear. WIRED's build listed $21 for the trigger components;<ref name="wired" /> a Glock-pattern trigger parts kit sells for about $31.<ref name="vendor-firecontrol" />]]

The firearm allegedly used by Luigi Mangione in the December 4, 2024 killing of UnitedHealthcare chief executive Brian Thompson became the most examined 3D-printed gun in recent reporting. WIRED's Andy Greenberg built and test-fired a clone of it for a May 19, 2025 teardown, and his account itemizes which parts a build like it prints and which it buys.<ref name="wired" />

Greenberg wrote that only the central part is printed: ''"only the central component of a firearm onto which all its other components are attached, known as the lower receiver for an AR-15 or the frame for a Glock-style handgun, is regulated as the gun."''<ref name="wired" /> The pressure-bearing parts were ordered as finished metal components. He listed the cost of the build as ''"$200 for the slide, $35 for the barrel, $21 for the components of the trigger mechanism, and just $650 for a printer,"'' and described ''"the slide and the barrel sitting on the table in front of us, the very gun-like components that actually hold the round and contain the explosive forces that propel a bullet."''<ref name="wired" /> The frame is designed by chairmanwon and is based on a printable Glock-pattern design released by an online group called the Gatalog.<ref name="wired" />

[[File:CRW-printed-carbon-fiber-tube.jpg|thumb|right|A carbon-fiber tube, an ordinary commercial product. Greenberg reported that the printed plastic suppressor had to be reinforced with a carbon-fiber tube before it could be fired.<ref name="wired" /> Such tubes sell for about $38.<ref name="vendor-carbontube" />]]
The printed suppressor needed reinforcement before it could be fired. Greenberg wrote that the plastic suppressor ''"still needed to be epoxied into a carbon-fiber tube for additional reinforcement."''<ref name="wired" /> When he fired the weapon in 9mm, it functioned but cycled poorly, and he attributed the trouble to the purchased slide rather than the printed frame: ''"None of these issues, in other words, had anything to do with the 3D-printed frame."''<ref name="wired" /> The build eventually fired more than 50 rounds.<ref name="wired" />

==Federal firearm definitions and the regulated component==

[[File:CRW-falsepos-glock-17-pistol.png|thumb|right|A Glock pistol. Under 27 CFR § 478.12(a)(1) the polymer frame is the regulated firearm; the barrel and slide carry no such status.<ref name="cfr47812" /><ref name="usc921" />]]

Under federal law the regulated part is the frame or receiver, not the metal parts that contain the firing pressure. Title 18 of the U.S. Code defines a firearm at 18 U.S.C. § 921(a)(3) to include ''"(B) the frame or receiver of any such weapon."''<ref name="usc921" /> The Bureau of Alcohol, Tobacco, Firearms and Explosives defines a handgun frame at 27 CFR § 478.12(a)(1) as ''"the part of a handgun, or variants thereof, that provides housing or a structure for the component (i.e., sear or equivalent) designed to hold back the hammer, striker, bolt, or similar primary energized component prior to initiation of the firing sequence."''<ref name="cfr47812" /> The Supreme Court, upholding the agency's 2022 frame-or-receiver rule in ''Bondi v. VanDerStok'' on March 26, 2025, restated the statutory scheme: ''"Under subsection (B) of §921(a)(3), 'the frame or receiver of any such weapon' covered by subsection (A) is itself treated as a 'firearm.' Effectively, that means a frame or receiver is, even when sold separately, subject to the Act's requirements."''<ref name="vanderstok" />

The barrel and slide carry no such status under those provisions.<ref name="usc921" /><ref name="cfr47812" /> The federal Office of the Inspector General, in an estimate reproduced in California's Assembly Bill 1089 analysis, put the cost of building a printed handgun at ''"around $700"'' for ''"3D printing a 9 millimeter handgun frame and adding unregulated firearm components (such as the barrel, trigger, slide, magazine, etc.)."''<ref name="oig" /> '''The serialized, regulated firearm is the frame the printer makes, while the metal parts that contain the explosion are sold as unregulated components.'''

The Electronic Frontier Foundation argued that a scanning mandate aimed at the printer therefore misses the harder bottleneck, calling the requirement ''"an unfeasible tech solution"'' and campaigning against the New York proposal on the ground that it ''"surveils every print."''<ref name="eff" />

[[File:Glock Gen 5 Parts Diagram.jpg|thumb|In this exploded view, everything except for item number 16 is a non-regulated firearm part.]]

==Hybrid builds versus fully printed guns==

The reporting record distinguishes sharply between fully printed firearms and hybrid builds. The ''Forensic Science International: Synergy'' study recorded that, among its sample, '''the fully printed firearms appeared as seizures rather than as weapons used to wound:''' ''"Cases in which 3D-printed firearms, firearm parts and equipment were recovered by the police and law enforcement services were labelled as Seizure ... No discharged firearms were reported among them."''<ref name="forensic" />

The harm tied to printed firearms runs through hybrids. The Mangione weapon was a hybrid. So was the weaponry used in the October 9, 2019 attack on a synagogue in Halle, Germany; ''The Guardian'' described the attacker's homemade weapons as including ''"some that were 3D-printed."''<ref name="guardian" /><ref name="ctc" /> At the scale of national tracing data, the Department of Justice reported in January 2025 that ''"Between 2017 and 2023, 92,702 suspected PMFs, untraceable 'ghost guns' that are obtained without background checks and do not contain serial numbers, were recovered and reported"'' to the ATF.<ref name="doj-pmf" />

==Conversion devices==

[[File:CRW-falsepos-glock-switch.jpg|thumb|right|Glock-pattern pistols fitted with an auto-sear conversion device, in an ATF image. Federal law defines the device as a machinegun whether or not it is attached to a gun.<ref name="usc5845" />]]

The one category in this area with a large, quantified harm record is the machine-gun conversion device, and it is largely a metal-parts problem rather than a printing problem. Federal law at 26 U.S.C. § 5845(b) defines a machinegun to include ''"any part designed and intended solely and exclusively, or combination of parts designed and intended, for use in converting a weapon into a machinegun,"'' so the device itself is a machinegun whether or not it is attached to a gun.<ref name="usc5845" /> A pistol converter, often called a Glock switch, alters the fire-control geometry so the pistol fires automatically.

The ATF reported in its National Firearms Commerce and Trafficking Assessment that recoveries of conversion devices rose from 814 in the 2012 through 2016 period to 5,454 in 2017 through 2021, a 570 percent increase.<ref name="nfcta" /><ref name="nfcta-news" /> The ''Washington Post'' reported that these devices reach the street through more than one supply chain: ''"The devices can be made of metal or plastic, and authorities believe some are imported from China and sold on the streets. But 3D printers also have been used to make them."''<ref name="wapo" /> A 3D printer is one way to make a conversion device, not a precondition for one. New York's budget reflected the seriousness of this category by making it a class D felony, effective May 31, 2027, for a dealer or gunsmith to sell, transfer, or ship a convertible pistol, under Penal Law § 265.10(10).<ref name="bill-pdf" />

==How broadly the law defines a 3D printer==

New York's statute defines the regulated machine in two prongs, reaching ''"any machine capable of rendering a three-dimensional object from a digital design file using additive manufacturing"'' and ''"any machine capable of making three-dimensional modifications to an object from a digital design file using subtractive manufacturing."''<ref name="bill-pdf" /> Writing in ''Techdirt'', Karl Bode argued that the text as drafted would reach open-source printer firmware projects such as Marlin, Klipper, and RepRap, offline office printers, and CNC milling equipment.<ref name="techdirt" /> The breadth of the regulated category sits opposite the narrowness of what a printer contributes to a working firearm: the non-pressure-bearing frame, the part federal law already regulates.

==See also==
*[[New York 3D printer blocking technology mandate]]
*[[Right to Repair]]
*[[Digital rights management]]
*[[Digital Millennium Copyright Act]]

==References==
<references>
<ref name="gov">{{Cite web |url=https://www.governor.ny.gov/news/keeping-new-yorkers-safe-governor-hochul-signs-legislation-strengthen-public-safety-and-make |title=Keeping New Yorkers Safe: Governor Hochul Signs Legislation to Strengthen Public Safety |publisher=Office of Governor Kathy Hochul |date=2026-05-27 |access-date=2026-06-01}}</ref>
<ref name="everytown">{{Cite web |url=https://www.everytown.org/press/new-york-shuts-down-the-plastic-pipeline-governor-hochul-and-lawmakers-pass-nation-leading-measures-to-stop-the-spread-of-diy-machine-guns-and-3d-printed-firearms-in-fy27-budget/ |title=New York Shuts Down the 'Plastic Pipeline' |publisher=Everytown for Gun Safety |date=2026-05-21 |access-date=2026-06-01}}</ref>
<ref name="saami">{{Cite web |url=https://www.outdoorlife.com/guns/what-is-p-ammo/ |title=What Is +P Ammo? |author=Outdoor Life staff |publisher=Outdoor Life |date=2021-06-01 |access-date=2026-06-01}} States the SAAMI maximum average pressure of 35,000 psi for the 9mm Luger cartridge.</ref>
<ref name="smallarms">{{Cite web |url=https://www.smallarmssurvey.org/sites/default/files/resources/SAS-OP32-Behind-the-Curve.pdf |title=Behind the Curve: New Technologies, New Control Challenges (Occasional Paper 32) |author=N.R. Jenzen-Jones |publisher=Small Arms Survey |date=2015 |access-date=2026-06-01}}</ref>
<ref name="ctc">{{Cite web |url=https://ctc.westpoint.edu/printing-terror-an-empirical-overview-of-the-use-of-3d-printed-firearms-by-right-wing-extremists/ |title=Printing Terror: An Empirical Overview of the Use of 3D-Printed Firearms by Right-Wing Extremists |publisher=Combating Terrorism Center at West Point |date=2024-06 |access-date=2026-06-01}}</ref>
<ref name="forensic">{{Cite web |url=https://pmc.ncbi.nlm.nih.gov/articles/PMC10998078/ |title=The emergence of 3D printed firearms: a forensic and criminological overview |publisher=Forensic Science International: Synergy |date=2024 |access-date=2026-06-01}}</ref>
<ref name="wired">{{Cite web |url=https://www.wired.com/story/luigi-mangione-ghost-gun-built-tested/ |title=We Built the Ghost Gun Luigi Mangione Allegedly Used, and Tested It |author=Andy Greenberg |publisher=WIRED |date=2025-05-19 |access-date=2026-06-01}}</ref>
<ref name="usc921">{{Cite web |url=https://www.law.cornell.edu/uscode/text/18/921 |title=18 U.S.C. § 921, Definitions |publisher=Legal Information Institute, Cornell Law School |date=2024 |access-date=2026-06-01}}</ref>
<ref name="cfr47812">{{Cite web |url=https://www.ecfr.gov/current/title-27/chapter-II/subchapter-B/part-478/subject-group-ECFR0f9b5e597e57820/section-478.12 |title=27 CFR § 478.12, Definition of frame or receiver |publisher=Code of Federal Regulations |date=2022 |access-date=2026-06-01}}</ref>
<ref name="vanderstok">{{Cite web |url=https://www.supremecourt.gov/opinions/24pdf/23-852_c07d.pdf |title=Bondi v. VanDerStok, No. 23-852 |publisher=Supreme Court of the United States |date=2025-03-26 |access-date=2026-06-01}}</ref>
<ref name="oig">{{Cite web |url=https://apsf.assembly.ca.gov/sites/apsf.assembly.ca.gov/files/AB%201089%20PCA%20Revised%20Version%20Final%20PDF.pdf |title=Assembly Bill 1089 committee analysis (citing U.S. Department of Justice Office of the Inspector General cost estimate) |publisher=California State Assembly Committee on Public Safety |date=2023 |access-date=2026-06-01}}</ref>
<ref name="eff">{{Cite web |url=https://www.eff.org/deeplinks/2026/04/stop-new-yorks-attack-3d-printing |title=Stop New York's Attack on 3D Printing |author=Rory Mir and Nathan Sheard |publisher=Electronic Frontier Foundation |date=2026-04-16 |access-date=2026-06-01}}</ref>
<ref name="guardian">{{Cite web |url=https://www.theguardian.com/lifeandstyle/2024/dec/07/gun-control-is-dead-and-we-killed-it-firearms-that-can-be-printed-at-home |title=Gun control is dead, and we killed it: the rise of firearms that can be printed at home |publisher=The Guardian |date=2024-12-07 |access-date=2026-06-01}}</ref>
<ref name="doj-pmf">{{Cite web |url=https://www.justice.gov/archives/opa/pr/justice-department-announces-atfs-publication-final-volume-national-firearms-commerce-and |title=Justice Department Announces ATF's Publication of the Final Volume of the National Firearms Commerce and Trafficking Assessment |publisher=United States Department of Justice |date=2025-01-16 |access-date=2026-06-01}}</ref>
<ref name="usc5845">{{Cite web |url=https://www.law.cornell.edu/uscode/text/26/5845 |title=26 U.S.C. § 5845, Definitions |publisher=Legal Information Institute, Cornell Law School |date=2024 |access-date=2026-06-01}}</ref>
<ref name="nfcta">{{Cite web |url=https://www.atf.gov/firearms/national-firearms-commerce-and-trafficking-assessment-nfcta-crime-guns-volume-two |title=National Firearms Commerce and Trafficking Assessment (NFCTA): Crime Guns, Volume Two, Part III |publisher=Bureau of Alcohol, Tobacco, Firearms and Explosives |date=2023 |access-date=2026-06-01}}</ref>
<ref name="nfcta-news">{{Cite web |url=https://www.news4jax.com/news/local/2023/02/14/atf-number-of-confiscated-illegal-machine-gun-conversion-devices-jump-570-in-5-years/ |title=ATF: Number of confiscated illegal machine gun conversion devices jump 570% in 5 years |author=Erik Avanier |publisher=News4JAX (WJXT) |date=2023-02-14 |access-date=2026-06-01}} Reports the ATF NFCTA figures of 814 devices confiscated 2012 to 2016 and 5,454 in 2017 to 2021, a 570% increase.</ref>
<ref name="wapo">{{Cite web |url=https://www.washingtonpost.com/dc-md-va/2023/12/06/with-conversion-switch-devices-machine-guns-return-us-streets/ |title=With 'conversion switch' devices, machine guns return to U.S. streets |author=Tom Jackman |publisher=The Washington Post |date=2023-12-06 |archive-url=https://web.archive.org/web/20250723040301/https://www.washingtonpost.com/dc-md-va/2023/12/06/with-conversion-switch-devices-machine-guns-return-us-streets/ |archive-date=2025-07-23 |access-date=2026-06-01}}</ref>
<ref name="bill-pdf">{{Cite web |url=https://assembly.ny.gov/2026budget/2026_bills/enacted/A10005c.pdf |title=Enacted text of A. 10005-C / S. 9005-C, FY2026-2027 budget, Part C |publisher=New York State Assembly |date=2026-05-27 |access-date=2026-06-01}}</ref>
<ref name="techdirt">{{Cite web |url=https://www.techdirt.com/2026/02/19/new-yorks-new-3d-printing-law-as-written-is-extremely-harmful-and-annoying/ |title=New York's New 3D Printing Law, As Written, Is Extremely Harmful And Annoying |author=Karl Bode |publisher=Techdirt |date=2026-02-19 |access-date=2026-06-01}}</ref>
<ref name="vendor-slide">{{Cite web |url=https://www.brownells.com/gun-parts/handgun-parts/handgun-slides-parts/complete-slide-assemblies-for-glock-19/ |title=Complete Slide Assembly With Barrel for Glock 19 |publisher=Brownells |date=2026-06-02 |access-date=2026-06-02}} A complete Glock-pattern slide assembly listed at $214.99 as of June 2, 2026.</ref>
<ref name="vendor-mag">{{Cite web |url=https://www.brownells.com/gun-parts/magazines/handgun-magazines-parts/pmag-gl9-9x19-magazine-for-glock-17/ |title=Magpul PMAG GL9 9mm Magazine for Glock 17 |publisher=Brownells |date=2026-06-02 |access-date=2026-06-02}} A Glock-pattern pistol magazine listed at $14.20 as of June 2, 2026.</ref>
<ref name="vendor-firecontrol">{{Cite web |url=https://www.brownells.com/gun-parts/handgun-parts/handgun-frames-parts/lower-parts-kit-for-glock1719/ |title=Lower Parts Kit for Glock 17/19 |publisher=Brownells |date=2026-06-02 |access-date=2026-06-02}} A Glock-pattern fire-control parts kit listed at $30.99 as of June 2, 2026.</ref>
<ref name="vendor-carbontube">{{Cite web |url=https://dragonplate.com/roll-wrapped-twill-finish-round-tubes |title=Roll Wrapped Twill Finish Round Carbon Fiber Tubes |publisher=DragonPlate |date=2026-06-02 |access-date=2026-06-02}} Commercial carbon-fiber tubes listed from $38.10 as of June 2, 2026.</ref>
<ref name="vendor-ammo">{{Cite web |url=https://sgammo.com/product/9mm-luger-ammo/50-round-box-9mm-luger-124-grain-fmj-sellier-bellot-ammo-sb9b/ |title=50 Round Box 9mm Luger 124 Grain FMJ Sellier and Bellot |publisher=SGAmmo |date=2026-06-02 |access-date=2026-06-02}} A 50-round box of 9mm Luger listed at $15.95 as of June 2, 2026.</ref>
<ref name="vendor-arbarrel">{{Cite web |url=https://www.brownells.com/gun-parts/rifle-parts/rifle-barrels-parts/ |title=Rifle Barrels and Parts |publisher=Brownells |date=2026-06-02 |access-date=2026-06-02}} AR-pattern rifle barrels offered for retail sale as of June 2, 2026.</ref>
<ref name="vendor-arbcg">{{Cite web |url=https://www.brownells.com/gun-parts/rifle-parts/rifle-bolts-bolt-carrier-groups/ |title=Rifle Bolts and Bolt Carrier Groups |publisher=Brownells |date=2026-06-02 |access-date=2026-06-02}} AR-pattern bolt carrier groups offered for retail sale as of June 2, 2026.</ref>
<ref name="vendor-arupper">{{Cite web |url=https://www.brownells.com/gun-parts/rifle-parts/rifle-receivers-parts/ |title=Rifle Receivers and Parts |publisher=Brownells |date=2026-06-02 |access-date=2026-06-02}} AR-15 upper receivers offered for retail sale as of June 2, 2026.</ref>
<ref name="vendor-arbuffer">{{Cite web |url=https://www.brownells.com/gun-parts/rifle-parts/rifle-recoil-parts/ar-15m16-buffer-springs/ |title=AR-15/M16 Buffer Springs |publisher=Brownells |date=2026-06-02 |access-date=2026-06-02}} AR-15 action springs listed from $3.65 as of June 2, 2026.</ref>
<ref name="vendor-steel">{{Cite web |url=https://www.metalsdepot.com/steel-products/steel-round-bar |title=Steel Round Bar |publisher=Metals Depot |date=2026-06-02 |access-date=2026-06-02}} A36 steel round bar stock sold cut to length as of June 2, 2026.</ref>
</references>

User talk:Hellreaver

2026-06-07T10:09:26Z

Hellreaver: /* Added to confirmed group */ Reply

{{Template:Welcome|realName=|name=Hellreaver}}

-- [[User:New user message|New user message]] ([[User talk:New user message|talk]]) 19:40, 16 May 2026 (UTC)

==Added to confirmed group==

I've added you to the group "Confirmed Users", so you should no longer be triggering the abuse filter upon attempting to edit [[User:Louis/3D-printed firearms and the technical basis for printer mandates]]. — [[User:Sojourna|Sojourna]] ([[User talk:Sojourna|talk]]) 05:00, 5 June 2026 (UTC)

:Thanks! Was just trying to add a citation 😭 [[User:Hellreaver|Hellreaver]] ([[User talk:Hellreaver|talk]]) 10:09, 7 June 2026 (UTC)

User:Louis/3D-printed firearms and the technical basis for printer mandates

2026-06-03T06:35:47Z

Hellreaver: /* Conversion devices */

Every 3D-printed firearm tied to a killing has been a hybrid, a plastic frame bolted to metal barrels and slides bought online; in the academic record, guns printed in full turn up only as seizures, none of them fired.<ref name="forensic" /><ref name="wired" /> The frame is the part that a consumer printer could make, and federal law counts that frame as ''the gun'' even though it holds back none of a fired cartridge's pressure.<ref name="vanderstok" /><ref name="smallarms" /> The metal parts that contain the explosion are not themselves firearms under federal law,<ref name="usc921" /><ref name="oig" /> and they are bought online as ordinary gun parts.<ref name="wired" /> According to chairmanwon, a famous 3D printed gun frame designer, as of April 2nd 2025, "There have been a grand total of 3 [confirmed] shootings with 3D printed guns. 3. Ever. In the history of the [United States]." which are "[Killing of] Brian Thompson, a 2022 non fatal shooting in Albany, New York & a possible 2024 non fatal shooting in Des Moines." <ref>{{Cite web |first=chairmanwon |date=2025-4-02 |title=There have been a grand total of 3 shootings with 3D printed guns. 3. Ever. In the history of the US.

Brian Thompson
a 2022 non fatal shooting in Albany, NY
& a possible 2024 non fatal shooting in Des Moines

This is literally the class of weapon LEAST likely to be used in crime |url=https://x.com/chairmanwon/status/1907117865590751247 |url-status=live |website=twitter}}</ref>

'''[[New York 3D printer blocking technology mandate|New York]] and several other states have answered the spread of printed firearms by regulating 3D printers, only one of the many machines that could be used to make firearm frames but are not capable of producing the necessarily metal parts that contain and direct the explosive pressure of a round that is fundamental to the function of a firearm.'''<ref name="bill-pdf" />

==Governor Hochul and Everytown's case for the mandate==

Governor Kathy Hochul's office announced the FY2027 budget provisions under the banner ''"Advances First-In-The-Nation Law To Crack Down on Illegal Homegrown 3D-Printed Guns,"'' describing the package as ''"cracking down on the scourge of illegal 3D-printed ghost guns and DIY machine guns."''<ref name="gov" /> The release stated that the budget would ''"Require first-in-the-nation minimum safety standards for 3D printers sold in New York to be equipped with basic technology that prevents the unlicensed, illegal production of lethal firearms and firearm parts."''<ref name="gov" />

The gun-safety group Everytown for Gun Safety promoted the budget under the headline ''"New York Shuts Down the 'Plastic Pipeline'"'' and wrote that the state was ''"addressing the 'Plastic Pipeline' head-on."''<ref name="everytown" /> Everytown framed the threat in its own voice: ''"By bypassing traditional background checks with the simple click of a 'print' button, 3D-printed firearms and gun parts are putting the safety of communities across New York at risk."''<ref name="everytown" /> Everytown's president, John Feinblatt, said that ''"it's no surprise that 3D-printed guns and do-it-yourself machine guns are increasingly turning up at New York crime scenes."''<ref name="everytown" />

==What 3D printing can and cannot make==

[[File:CRW-printed-9mm-ammo.jpg|thumb|right|A 9mm Luger cartridge. The Sporting Arms and Ammunition Manufacturers' Institute sets its maximum average pressure at 35,000 pounds per square inch, the force the barrel, chamber, and breech face contain on every shot.<ref name="saami" /> Boxes of 9mm Luger sell for about $16 per 50 rounds.<ref name="vendor-ammo" />]]

A firearm concentrates the force of a fired cartridge in a small set of parts. The Sporting Arms and Ammunition Manufacturers' Institute sets the maximum average pressure for the 9mm Luger cartridge at 35,000 pounds per square inch<ref name="saami" />, or 55,000psi for 5.56mm NATO, a common AR-15 rifle round. The barrel, chamber, bolt or breech face, and slide face need to withstand that pressure for every round fired. The frame or lower receiver, which houses the trigger group and magazine and keeps the metal parts aligned, does not.

[[File:CRW-falsepos-ar15-lower-receiver.jpg|thumb|right|A stripped AR-15 lower receiver, the part a printer makes in a rifle build. The Small Arms Survey describes the lower as aligning the parts and housing the trigger group, while the barrel, bolt, and upper bear the firing stresses.<ref name="smallarms" /> Federal law treats the receiver as the firearm.<ref name="usc921" />]]

The Small Arms Survey, in an assessment of 3D-printed firearm components, described the division of labor inside a typical design: ''"In the AR-15 design, for example, the thermal and mechanical stresses of firing are borne mainly by the barrel, bolt, and upper-receiver assemblies. The lower receiver is primarily intended to ensure the correct alignment and interface of the operating parts of the firearm, and to house the trigger and fire selector and safety mechanisms."''<ref name="smallarms" /> Consumer fused-deposition thermoplastics can make that low-stress frame. They cannot make a barrel or chamber that survives a centerfire cartridge, which is why printed firearms recovered in the field pair a printed frame with commercially made metal pressure-bearing parts rather than printing the whole gun.

The Combating Terrorism Center at West Point drew the same distinction in its survey of printed firearms used by extremists. It described hybrid designs as weapons that ''"incorporate 3D-printed components with readily available and unregulated components such as steel tubing, metal bar stocks, and springs that are designed to withstand the pressure of a discharge more efficiently and thus generally make for a more reliable and durable firearm."''<ref name="ctc" /> A 2024 study in ''Forensic Science International: Synergy'' that catalogued 186 law enforcement encounters with 3D-printed firearms recorded only 14 involving fully printed guns, and noted that such weapons are ''"considered less reliable and durable."''<ref name="forensic" />

<gallery widths="190" heights="150" caption="Purchased metal parts of an AR-15 hybrid build">
File:CRW-printed-ar15-barrel.jpg|AR-15 barrel in 5.56mm NATO, sold as a commercial component.<ref name="vendor-arbarrel" />
File:CRW-printed-ar15-bcg.jpg|AR-15 bolt carrier group, which locks the breech.<ref name="vendor-arbcg" />
File:CRW-printed-ar15-buffer.jpg|The action spring in the stock tube, sold for about $4.<ref name="vendor-arbuffer" />
File:CRW-printed-steel-stock.jpg|Metal bar stock, among the materials the Combating Terrorism Center lists in hybrid builds.<ref name="ctc" /><ref name="vendor-steel" />
</gallery>

==Mangione's printed frame and purchased metal parts==

[[File:CRW-printed-glock-fieldstrip.jpg|thumb|right|A field-stripped Glock-pattern pistol. A consumer printer makes only the polymer frame, which federal law treats as the firearm.<ref name="vanderstok" /> The slide, barrel, recoil spring assembly, and magazine are bought as finished, unregulated components.<ref name="wired" /><ref name="oig" /> Greenberg's clone cost $200 for the slide and $35 for the barrel;<ref name="wired" /> a complete slide assembly and a magazine sell for about $215 and $14.<ref name="vendor-slide" /><ref name="vendor-mag" />]]
[[File:CRW-printed-fire-control.png|thumb|left|The fire-control parts of a Glock-pattern pistol in a figure from US Patent 4,539,889: the striker, trigger bar, and sear. WIRED's build listed $21 for the trigger components;<ref name="wired" /> a Glock-pattern trigger parts kit sells for about $31.<ref name="vendor-firecontrol" />]]

The firearm allegedly used by Luigi Mangione in the December 4, 2024 killing of UnitedHealthcare chief executive Brian Thompson became the most examined 3D-printed gun in recent reporting. WIRED's Andy Greenberg built and test-fired a clone of it for a May 19, 2025 teardown, and his account itemizes which parts a build like it prints and which it buys.<ref name="wired" />

Greenberg wrote that only the central part is printed: ''"only the central component of a firearm onto which all its other components are attached, known as the lower receiver for an AR-15 or the frame for a Glock-style handgun, is regulated as the gun."''<ref name="wired" /> The pressure-bearing parts were ordered as finished metal components. He listed the cost of the build as ''"$200 for the slide, $35 for the barrel, $21 for the components of the trigger mechanism, and just $650 for a printer,"'' and described ''"the slide and the barrel sitting on the table in front of us, the very gun-like components that actually hold the round and contain the explosive forces that propel a bullet."''<ref name="wired" /> The frame is designed by chairmanwon and is based on a printable Glock-pattern design released by an online group called the Gatalog.<ref name="wired" />

[[File:CRW-printed-carbon-fiber-tube.jpg|thumb|right|A carbon-fiber tube, an ordinary commercial product. Greenberg reported that the printed plastic suppressor had to be reinforced with a carbon-fiber tube before it could be fired.<ref name="wired" /> Such tubes sell for about $38.<ref name="vendor-carbontube" />]]
The printed suppressor needed reinforcement before it could be fired. Greenberg wrote that the plastic suppressor ''"still needed to be epoxied into a carbon-fiber tube for additional reinforcement."''<ref name="wired" /> When he fired the weapon in 9mm, it functioned but cycled poorly, and he attributed the trouble to the purchased slide rather than the printed frame: ''"None of these issues, in other words, had anything to do with the 3D-printed frame."''<ref name="wired" /> The build eventually fired more than 50 rounds.<ref name="wired" />

==Federal firearm definitions and the regulated component==

[[File:CRW-falsepos-glock-17-pistol.png|thumb|right|A Glock pistol. Under 27 CFR § 478.12(a)(1) the polymer frame is the regulated firearm; the barrel and slide carry no such status.<ref name="cfr47812" /><ref name="usc921" />]]

Under federal law the regulated part is the frame or receiver, not the metal parts that contain the firing pressure. Title 18 of the U.S. Code defines a firearm at 18 U.S.C. § 921(a)(3) to include ''"(B) the frame or receiver of any such weapon."''<ref name="usc921" /> The Bureau of Alcohol, Tobacco, Firearms and Explosives defines a handgun frame at 27 CFR § 478.12(a)(1) as ''"the part of a handgun, or variants thereof, that provides housing or a structure for the component (i.e., sear or equivalent) designed to hold back the hammer, striker, bolt, or similar primary energized component prior to initiation of the firing sequence."''<ref name="cfr47812" /> The Supreme Court, upholding the agency's 2022 frame-or-receiver rule in ''Bondi v. VanDerStok'' on March 26, 2025, restated the statutory scheme: ''"Under subsection (B) of §921(a)(3), 'the frame or receiver of any such weapon' covered by subsection (A) is itself treated as a 'firearm.' Effectively, that means a frame or receiver is, even when sold separately, subject to the Act's requirements."''<ref name="vanderstok" />

The barrel and slide carry no such status under those provisions.<ref name="usc921" /><ref name="cfr47812" /> The federal Office of the Inspector General, in an estimate reproduced in California's Assembly Bill 1089 analysis, put the cost of building a printed handgun at ''"around $700"'' for ''"3D printing a 9 millimeter handgun frame and adding unregulated firearm components (such as the barrel, trigger, slide, magazine, etc.)."''<ref name="oig" /> '''The serialized, regulated firearm is the frame the printer makes, while the metal parts that contain the explosion are sold as unregulated components.'''

The Electronic Frontier Foundation argued that a scanning mandate aimed at the printer therefore misses the harder bottleneck, calling the requirement ''"an unfeasible tech solution"'' and campaigning against the New York proposal on the ground that it ''"surveils every print."''<ref name="eff" />

[[File:Glock Gen 5 Parts Diagram.jpg|thumb|In this exploded view, everything except for item number 16 is a non-regulated firearm part.]]

==Hybrid builds versus fully printed guns==

The reporting record distinguishes sharply between fully printed firearms and hybrid builds. The ''Forensic Science International: Synergy'' study recorded that, among its sample, '''the fully printed firearms appeared as seizures rather than as weapons used to wound:''' ''"Cases in which 3D-printed firearms, firearm parts and equipment were recovered by the police and law enforcement services were labelled as Seizure ... No discharged firearms were reported among them."''<ref name="forensic" />

The harm tied to printed firearms runs through hybrids. The Mangione weapon was a hybrid. So was the weaponry used in the October 9, 2019 attack on a synagogue in Halle, Germany; ''The Guardian'' described the attacker's homemade weapons as including ''"some that were 3D-printed."''<ref name="guardian" /><ref name="ctc" /> At the scale of national tracing data, the Department of Justice reported in January 2025 that ''"Between 2017 and 2023, 92,702 suspected PMFs, untraceable 'ghost guns' that are obtained without background checks and do not contain serial numbers, were recovered and reported"'' to the ATF.<ref name="doj-pmf" />

==Conversion devices==

[[File:CRW-falsepos-glock-switch.jpg|thumb|right|Glock-pattern pistols fitted with an auto-sear conversion device, in an ATF image. Federal law defines the device as a machinegun whether or not it is attached to a gun.<ref name="usc5845" />]]

The one category in this area with a large, quantified harm record is the machine-gun conversion device, and it is largely a metal-parts problem rather than a printing problem. Federal law at 26 U.S.C. § 5845(b) defines a machinegun to include ''"any part designed and intended solely and exclusively, or combination of parts designed and intended, for use in converting a weapon into a machinegun,"'' so the device itself is a machinegun whether or not it is attached to a gun.<ref name="usc5845" /> A pistol converter, often called a Glock switch, alters the fire-control geometry so the pistol fires automatically.

The ATF reported in its National Firearms Commerce and Trafficking Assessment that recoveries of conversion devices rose from 814 in the 2012 through 2016 period to 5,454 in 2017 through 2021, a 570 percent increase.<ref name="nfcta" /><ref name="nfcta-news" /> The ''Washington Post'' reported that these devices reach the street through more than one supply chain: ''"The devices can be made of metal or plastic, and authorities believe some are imported from China and sold on the streets. But 3D printers also have been used to make them."''<ref name="wapo" /> A 3D printer is one way to make a conversion device, not a precondition for one. New York's budget reflected the seriousness of this category by making it a class D felony, effective May 31, 2027, for a dealer or gunsmith to sell, transfer, or ship a convertible pistol, under Penal Law § 265.10(10).<ref name="bill-pdf" />

==How broadly the law defines a 3D printer==

New York's statute defines the regulated machine in two prongs, reaching ''"any machine capable of rendering a three-dimensional object from a digital design file using additive manufacturing"'' and ''"any machine capable of making three-dimensional modifications to an object from a digital design file using subtractive manufacturing."''<ref name="bill-pdf" /> Writing in ''Techdirt'', Karl Bode argued that the text as drafted would reach open-source printer firmware projects such as Marlin, Klipper, and RepRap, offline office printers, and CNC milling equipment.<ref name="techdirt" /> The breadth of the regulated category sits opposite the narrowness of what a printer contributes to a working firearm: the non-pressure-bearing frame, the part federal law already regulates.

==See also==
*[[New York 3D printer blocking technology mandate]]
*[[Right to Repair]]
*[[Digital rights management]]
*[[Digital Millennium Copyright Act]]

==References==
<references>
<ref name="gov">{{Cite web |url=https://www.governor.ny.gov/news/keeping-new-yorkers-safe-governor-hochul-signs-legislation-strengthen-public-safety-and-make |title=Keeping New Yorkers Safe: Governor Hochul Signs Legislation to Strengthen Public Safety |publisher=Office of Governor Kathy Hochul |date=2026-05-27 |access-date=2026-06-01}}</ref>
<ref name="everytown">{{Cite web |url=https://www.everytown.org/press/new-york-shuts-down-the-plastic-pipeline-governor-hochul-and-lawmakers-pass-nation-leading-measures-to-stop-the-spread-of-diy-machine-guns-and-3d-printed-firearms-in-fy27-budget/ |title=New York Shuts Down the 'Plastic Pipeline' |publisher=Everytown for Gun Safety |date=2026-05-21 |access-date=2026-06-01}}</ref>
<ref name="saami">{{Cite web |url=https://www.outdoorlife.com/guns/what-is-p-ammo/ |title=What Is +P Ammo? |author=Outdoor Life staff |publisher=Outdoor Life |date=2021-06-01 |access-date=2026-06-01}} States the SAAMI maximum average pressure of 35,000 psi for the 9mm Luger cartridge.</ref>
<ref name="smallarms">{{Cite web |url=https://www.smallarmssurvey.org/sites/default/files/resources/SAS-OP32-Behind-the-Curve.pdf |title=Behind the Curve: New Technologies, New Control Challenges (Occasional Paper 32) |author=N.R. Jenzen-Jones |publisher=Small Arms Survey |date=2015 |access-date=2026-06-01}}</ref>
<ref name="ctc">{{Cite web |url=https://ctc.westpoint.edu/printing-terror-an-empirical-overview-of-the-use-of-3d-printed-firearms-by-right-wing-extremists/ |title=Printing Terror: An Empirical Overview of the Use of 3D-Printed Firearms by Right-Wing Extremists |publisher=Combating Terrorism Center at West Point |date=2024-06 |access-date=2026-06-01}}</ref>
<ref name="forensic">{{Cite web |url=https://pmc.ncbi.nlm.nih.gov/articles/PMC10998078/ |title=The emergence of 3D printed firearms: a forensic and criminological overview |publisher=Forensic Science International: Synergy |date=2024 |access-date=2026-06-01}}</ref>
<ref name="wired">{{Cite web |url=https://www.wired.com/story/luigi-mangione-ghost-gun-built-tested/ |title=We Built the Ghost Gun Luigi Mangione Allegedly Used, and Tested It |author=Andy Greenberg |publisher=WIRED |date=2025-05-19 |access-date=2026-06-01}}</ref>
<ref name="usc921">{{Cite web |url=https://www.law.cornell.edu/uscode/text/18/921 |title=18 U.S.C. § 921, Definitions |publisher=Legal Information Institute, Cornell Law School |date=2024 |access-date=2026-06-01}}</ref>
<ref name="cfr47812">{{Cite web |url=https://www.ecfr.gov/current/title-27/chapter-II/subchapter-B/part-478/subject-group-ECFR0f9b5e597e57820/section-478.12 |title=27 CFR § 478.12, Definition of frame or receiver |publisher=Code of Federal Regulations |date=2022 |access-date=2026-06-01}}</ref>
<ref name="vanderstok">{{Cite web |url=https://www.supremecourt.gov/opinions/24pdf/23-852_c07d.pdf |title=Bondi v. VanDerStok, No. 23-852 |publisher=Supreme Court of the United States |date=2025-03-26 |access-date=2026-06-01}}</ref>
<ref name="oig">{{Cite web |url=https://apsf.assembly.ca.gov/sites/apsf.assembly.ca.gov/files/AB%201089%20PCA%20Revised%20Version%20Final%20PDF.pdf |title=Assembly Bill 1089 committee analysis (citing U.S. Department of Justice Office of the Inspector General cost estimate) |publisher=California State Assembly Committee on Public Safety |date=2023 |access-date=2026-06-01}}</ref>
<ref name="eff">{{Cite web |url=https://www.eff.org/deeplinks/2026/04/stop-new-yorks-attack-3d-printing |title=Stop New York's Attack on 3D Printing |author=Rory Mir and Nathan Sheard |publisher=Electronic Frontier Foundation |date=2026-04-16 |access-date=2026-06-01}}</ref>
<ref name="guardian">{{Cite web |url=https://www.theguardian.com/lifeandstyle/2024/dec/07/gun-control-is-dead-and-we-killed-it-firearms-that-can-be-printed-at-home |title=Gun control is dead, and we killed it: the rise of firearms that can be printed at home |publisher=The Guardian |date=2024-12-07 |access-date=2026-06-01}}</ref>
<ref name="doj-pmf">{{Cite web |url=https://www.justice.gov/archives/opa/pr/justice-department-announces-atfs-publication-final-volume-national-firearms-commerce-and |title=Justice Department Announces ATF's Publication of the Final Volume of the National Firearms Commerce and Trafficking Assessment |publisher=United States Department of Justice |date=2025-01-16 |access-date=2026-06-01}}</ref>
<ref name="usc5845">{{Cite web |url=https://www.law.cornell.edu/uscode/text/26/5845 |title=26 U.S.C. § 5845, Definitions |publisher=Legal Information Institute, Cornell Law School |date=2024 |access-date=2026-06-01}}</ref>
<ref name="nfcta">{{Cite web |url=https://www.atf.gov/firearms/national-firearms-commerce-and-trafficking-assessment-nfcta-crime-guns-volume-two |title=National Firearms Commerce and Trafficking Assessment (NFCTA): Crime Guns, Volume Two, Part III |publisher=Bureau of Alcohol, Tobacco, Firearms and Explosives |date=2023 |access-date=2026-06-01}}</ref>
<ref name="nfcta-news">{{Cite web |url=https://www.news4jax.com/news/local/2023/02/14/atf-number-of-confiscated-illegal-machine-gun-conversion-devices-jump-570-in-5-years/ |title=ATF: Number of confiscated illegal machine gun conversion devices jump 570% in 5 years |author=Erik Avanier |publisher=News4JAX (WJXT) |date=2023-02-14 |access-date=2026-06-01}} Reports the ATF NFCTA figures of 814 devices confiscated 2012 to 2016 and 5,454 in 2017 to 2021, a 570% increase.</ref>
<ref name="wapo">{{Cite web |url=https://www.washingtonpost.com/dc-md-va/2023/12/06/with-conversion-switch-devices-machine-guns-return-us-streets/ |title=With 'conversion switch' devices, machine guns return to U.S. streets |author=Tom Jackman |publisher=The Washington Post |date=2023-12-06 |archive-url=https://web.archive.org/web/20250723040301/https://www.washingtonpost.com/dc-md-va/2023/12/06/with-conversion-switch-devices-machine-guns-return-us-streets/ |archive-date=2025-07-23 |access-date=2026-06-01}}</ref>
<ref name="bill-pdf">{{Cite web |url=https://assembly.ny.gov/2026budget/2026_bills/enacted/A10005c.pdf |title=Enacted text of A. 10005-C / S. 9005-C, FY2026-2027 budget, Part C |publisher=New York State Assembly |date=2026-05-27 |access-date=2026-06-01}}</ref>
<ref name="techdirt">{{Cite web |url=https://www.techdirt.com/2026/02/19/new-yorks-new-3d-printing-law-as-written-is-extremely-harmful-and-annoying/ |title=New York's New 3D Printing Law, As Written, Is Extremely Harmful And Annoying |author=Karl Bode |publisher=Techdirt |date=2026-02-19 |access-date=2026-06-01}}</ref>
<ref name="vendor-slide">{{Cite web |url=https://www.brownells.com/gun-parts/handgun-parts/handgun-slides-parts/complete-slide-assemblies-for-glock-19/ |title=Complete Slide Assembly With Barrel for Glock 19 |publisher=Brownells |date=2026-06-02 |access-date=2026-06-02}} A complete Glock-pattern slide assembly listed at $214.99 as of June 2, 2026.</ref>
<ref name="vendor-mag">{{Cite web |url=https://www.brownells.com/gun-parts/magazines/handgun-magazines-parts/pmag-gl9-9x19-magazine-for-glock-17/ |title=Magpul PMAG GL9 9mm Magazine for Glock 17 |publisher=Brownells |date=2026-06-02 |access-date=2026-06-02}} A Glock-pattern pistol magazine listed at $14.20 as of June 2, 2026.</ref>
<ref name="vendor-firecontrol">{{Cite web |url=https://www.brownells.com/gun-parts/handgun-parts/handgun-frames-parts/lower-parts-kit-for-glock1719/ |title=Lower Parts Kit for Glock 17/19 |publisher=Brownells |date=2026-06-02 |access-date=2026-06-02}} A Glock-pattern fire-control parts kit listed at $30.99 as of June 2, 2026.</ref>
<ref name="vendor-carbontube">{{Cite web |url=https://dragonplate.com/roll-wrapped-twill-finish-round-tubes |title=Roll Wrapped Twill Finish Round Carbon Fiber Tubes |publisher=DragonPlate |date=2026-06-02 |access-date=2026-06-02}} Commercial carbon-fiber tubes listed from $38.10 as of June 2, 2026.</ref>
<ref name="vendor-ammo">{{Cite web |url=https://sgammo.com/product/9mm-luger-ammo/50-round-box-9mm-luger-124-grain-fmj-sellier-bellot-ammo-sb9b/ |title=50 Round Box 9mm Luger 124 Grain FMJ Sellier and Bellot |publisher=SGAmmo |date=2026-06-02 |access-date=2026-06-02}} A 50-round box of 9mm Luger listed at $15.95 as of June 2, 2026.</ref>
<ref name="vendor-arbarrel">{{Cite web |url=https://www.brownells.com/gun-parts/rifle-parts/rifle-barrels-parts/ |title=Rifle Barrels and Parts |publisher=Brownells |date=2026-06-02 |access-date=2026-06-02}} AR-pattern rifle barrels offered for retail sale as of June 2, 2026.</ref>
<ref name="vendor-arbcg">{{Cite web |url=https://www.brownells.com/gun-parts/rifle-parts/rifle-bolts-bolt-carrier-groups/ |title=Rifle Bolts and Bolt Carrier Groups |publisher=Brownells |date=2026-06-02 |access-date=2026-06-02}} AR-pattern bolt carrier groups offered for retail sale as of June 2, 2026.</ref>
<ref name="vendor-arupper">{{Cite web |url=https://www.brownells.com/gun-parts/rifle-parts/rifle-receivers-parts/ |title=Rifle Receivers and Parts |publisher=Brownells |date=2026-06-02 |access-date=2026-06-02}} AR-15 upper receivers offered for retail sale as of June 2, 2026.</ref>
<ref name="vendor-arbuffer">{{Cite web |url=https://www.brownells.com/gun-parts/rifle-parts/rifle-recoil-parts/ar-15m16-buffer-springs/ |title=AR-15/M16 Buffer Springs |publisher=Brownells |date=2026-06-02 |access-date=2026-06-02}} AR-15 action springs listed from $3.65 as of June 2, 2026.</ref>
<ref name="vendor-steel">{{Cite web |url=https://www.metalsdepot.com/steel-products/steel-round-bar |title=Steel Round Bar |publisher=Metals Depot |date=2026-06-02 |access-date=2026-06-02}} A36 steel round bar stock sold cut to length as of June 2, 2026.</ref>
</references>

User:Louis/3D-printed firearms and the technical basis for printer mandates

2026-06-03T06:21:58Z

Hellreaver: /* Federal firearm definitions and the regulated component */ Added a photo displaying the number of controlled components (frame) versus other purchasable components.

Every 3D-printed firearm tied to a killing has been a hybrid, a plastic frame bolted to metal barrels and slides bought online; in the academic record, guns printed in full turn up only as seizures, none of them fired.<ref name="forensic" /><ref name="wired" /> The frame is the part that a consumer printer could make, and federal law counts that frame as ''the gun'' even though it holds back none of a fired cartridge's pressure.<ref name="vanderstok" /><ref name="smallarms" /> The metal parts that contain the explosion are not themselves firearms under federal law,<ref name="usc921" /><ref name="oig" /> and they are bought online as ordinary gun parts.<ref name="wired" /> According to chairmanwon, a famous 3D printed gun frame designer, as of April 2nd 2025, "There have been a grand total of 3 [confirmed] shootings with 3D printed guns. 3. Ever. In the history of the [United States]." which are "[Killing of] Brian Thompson, a 2022 non fatal shooting in Albany, New York & a possible 2024 non fatal shooting in Des Moines." <ref>{{Cite web |first=chairmanwon |date=2025-4-02 |title=There have been a grand total of 3 shootings with 3D printed guns. 3. Ever. In the history of the US.

Brian Thompson
a 2022 non fatal shooting in Albany, NY
& a possible 2024 non fatal shooting in Des Moines

This is literally the class of weapon LEAST likely to be used in crime |url=https://x.com/chairmanwon/status/1907117865590751247 |url-status=live |website=twitter}}</ref>

'''[[New York 3D printer blocking technology mandate|New York]] and several other states have answered the spread of printed firearms by regulating 3D printers, only one of the many machines that could be used to make firearm frames but are not capable of producing the necessarily metal parts that contain and direct the explosive pressure of a round that is fundamental to the function of a firearm.'''<ref name="bill-pdf" />

==Governor Hochul and Everytown's case for the mandate==

Governor Kathy Hochul's office announced the FY2027 budget provisions under the banner ''"Advances First-In-The-Nation Law To Crack Down on Illegal Homegrown 3D-Printed Guns,"'' describing the package as ''"cracking down on the scourge of illegal 3D-printed ghost guns and DIY machine guns."''<ref name="gov" /> The release stated that the budget would ''"Require first-in-the-nation minimum safety standards for 3D printers sold in New York to be equipped with basic technology that prevents the unlicensed, illegal production of lethal firearms and firearm parts."''<ref name="gov" />

The gun-safety group Everytown for Gun Safety promoted the budget under the headline ''"New York Shuts Down the 'Plastic Pipeline'"'' and wrote that the state was ''"addressing the 'Plastic Pipeline' head-on."''<ref name="everytown" /> Everytown framed the threat in its own voice: ''"By bypassing traditional background checks with the simple click of a 'print' button, 3D-printed firearms and gun parts are putting the safety of communities across New York at risk."''<ref name="everytown" /> Everytown's president, John Feinblatt, said that ''"it's no surprise that 3D-printed guns and do-it-yourself machine guns are increasingly turning up at New York crime scenes."''<ref name="everytown" />

==What 3D printing can and cannot make==

[[File:CRW-printed-9mm-ammo.jpg|thumb|right|A 9mm Luger cartridge. The Sporting Arms and Ammunition Manufacturers' Institute sets its maximum average pressure at 35,000 pounds per square inch, the force the barrel, chamber, and breech face contain on every shot.<ref name="saami" /> Boxes of 9mm Luger sell for about $16 per 50 rounds.<ref name="vendor-ammo" />]]

A firearm concentrates the force of a fired cartridge in a small set of parts. The Sporting Arms and Ammunition Manufacturers' Institute sets the maximum average pressure for the 9mm Luger cartridge at 35,000 pounds per square inch<ref name="saami" />, or 55,000psi for 5.56mm NATO, a common AR-15 rifle round. The barrel, chamber, bolt or breech face, and slide face need to withstand that pressure for every round fired. The frame or lower receiver, which houses the trigger group and magazine and keeps the metal parts aligned, does not.

[[File:CRW-falsepos-ar15-lower-receiver.jpg|thumb|right|A stripped AR-15 lower receiver, the part a printer makes in a rifle build. The Small Arms Survey describes the lower as aligning the parts and housing the trigger group, while the barrel, bolt, and upper bear the firing stresses.<ref name="smallarms" /> Federal law treats the receiver as the firearm.<ref name="usc921" />]]

The Small Arms Survey, in an assessment of 3D-printed firearm components, described the division of labor inside a typical design: ''"In the AR-15 design, for example, the thermal and mechanical stresses of firing are borne mainly by the barrel, bolt, and upper-receiver assemblies. The lower receiver is primarily intended to ensure the correct alignment and interface of the operating parts of the firearm, and to house the trigger and fire selector and safety mechanisms."''<ref name="smallarms" /> Consumer fused-deposition thermoplastics can make that low-stress frame. They cannot make a barrel or chamber that survives a centerfire cartridge, which is why printed firearms recovered in the field pair a printed frame with commercially made metal pressure-bearing parts rather than printing the whole gun.

The Combating Terrorism Center at West Point drew the same distinction in its survey of printed firearms used by extremists. It described hybrid designs as weapons that ''"incorporate 3D-printed components with readily available and unregulated components such as steel tubing, metal bar stocks, and springs that are designed to withstand the pressure of a discharge more efficiently and thus generally make for a more reliable and durable firearm."''<ref name="ctc" /> A 2024 study in ''Forensic Science International: Synergy'' that catalogued 186 law enforcement encounters with 3D-printed firearms recorded only 14 involving fully printed guns, and noted that such weapons are ''"considered less reliable and durable."''<ref name="forensic" />

<gallery widths="190" heights="150" caption="Purchased metal parts of an AR-15 hybrid build">
File:CRW-printed-ar15-barrel.jpg|AR-15 barrel in 5.56mm NATO, sold as a commercial component.<ref name="vendor-arbarrel" />
File:CRW-printed-ar15-bcg.jpg|AR-15 bolt carrier group, which locks the breech.<ref name="vendor-arbcg" />
File:CRW-printed-ar15-buffer.jpg|The action spring in the stock tube, sold for about $4.<ref name="vendor-arbuffer" />
File:CRW-printed-steel-stock.jpg|Metal bar stock, among the materials the Combating Terrorism Center lists in hybrid builds.<ref name="ctc" /><ref name="vendor-steel" />
</gallery>

==Mangione's printed frame and purchased metal parts==

[[File:CRW-printed-glock-fieldstrip.jpg|thumb|right|A field-stripped Glock-pattern pistol. A consumer printer makes only the polymer frame, which federal law treats as the firearm.<ref name="vanderstok" /> The slide, barrel, recoil spring assembly, and magazine are bought as finished, unregulated components.<ref name="wired" /><ref name="oig" /> Greenberg's clone cost $200 for the slide and $35 for the barrel;<ref name="wired" /> a complete slide assembly and a magazine sell for about $215 and $14.<ref name="vendor-slide" /><ref name="vendor-mag" />]]
[[File:CRW-printed-fire-control.png|thumb|left|The fire-control parts of a Glock-pattern pistol in a figure from US Patent 4,539,889: the striker, trigger bar, and sear. WIRED's build listed $21 for the trigger components;<ref name="wired" /> a Glock-pattern trigger parts kit sells for about $31.<ref name="vendor-firecontrol" />]]

The firearm allegedly used by Luigi Mangione in the December 4, 2024 killing of UnitedHealthcare chief executive Brian Thompson became the most examined 3D-printed gun in recent reporting. WIRED's Andy Greenberg built and test-fired a clone of it for a May 19, 2025 teardown, and his account itemizes which parts a build like it prints and which it buys.<ref name="wired" />

Greenberg wrote that only the central part is printed: ''"only the central component of a firearm onto which all its other components are attached, known as the lower receiver for an AR-15 or the frame for a Glock-style handgun, is regulated as the gun."''<ref name="wired" /> The pressure-bearing parts were ordered as finished metal components. He listed the cost of the build as ''"$200 for the slide, $35 for the barrel, $21 for the components of the trigger mechanism, and just $650 for a printer,"'' and described ''"the slide and the barrel sitting on the table in front of us, the very gun-like components that actually hold the round and contain the explosive forces that propel a bullet."''<ref name="wired" /> The frame is designed by chairmanwon and is based on a printable Glock-pattern design released by an online group called the Gatalog.<ref name="wired" />

[[File:CRW-printed-carbon-fiber-tube.jpg|thumb|right|A carbon-fiber tube, an ordinary commercial product. Greenberg reported that the printed plastic suppressor had to be reinforced with a carbon-fiber tube before it could be fired.<ref name="wired" /> Such tubes sell for about $38.<ref name="vendor-carbontube" />]]
The printed suppressor needed reinforcement before it could be fired. Greenberg wrote that the plastic suppressor ''"still needed to be epoxied into a carbon-fiber tube for additional reinforcement."''<ref name="wired" /> When he fired the weapon in 9mm, it functioned but cycled poorly, and he attributed the trouble to the purchased slide rather than the printed frame: ''"None of these issues, in other words, had anything to do with the 3D-printed frame."''<ref name="wired" /> The build eventually fired more than 50 rounds.<ref name="wired" />

==Federal firearm definitions and the regulated component==

[[File:CRW-falsepos-glock-17-pistol.png|thumb|right|A Glock pistol. Under 27 CFR § 478.12(a)(1) the polymer frame is the regulated firearm; the barrel and slide carry no such status.<ref name="cfr47812" /><ref name="usc921" />]]

Under federal law the regulated part is the frame or receiver, not the metal parts that contain the firing pressure. Title 18 of the U.S. Code defines a firearm at 18 U.S.C. § 921(a)(3) to include ''"(B) the frame or receiver of any such weapon."''<ref name="usc921" /> The Bureau of Alcohol, Tobacco, Firearms and Explosives defines a handgun frame at 27 CFR § 478.12(a)(1) as ''"the part of a handgun, or variants thereof, that provides housing or a structure for the component (i.e., sear or equivalent) designed to hold back the hammer, striker, bolt, or similar primary energized component prior to initiation of the firing sequence."''<ref name="cfr47812" /> The Supreme Court, upholding the agency's 2022 frame-or-receiver rule in ''Bondi v. VanDerStok'' on March 26, 2025, restated the statutory scheme: ''"Under subsection (B) of §921(a)(3), 'the frame or receiver of any such weapon' covered by subsection (A) is itself treated as a 'firearm.' Effectively, that means a frame or receiver is, even when sold separately, subject to the Act's requirements."''<ref name="vanderstok" />

The barrel and slide carry no such status under those provisions.<ref name="usc921" /><ref name="cfr47812" /> The federal Office of the Inspector General, in an estimate reproduced in California's Assembly Bill 1089 analysis, put the cost of building a printed handgun at ''"around $700"'' for ''"3D printing a 9 millimeter handgun frame and adding unregulated firearm components (such as the barrel, trigger, slide, magazine, etc.)."''<ref name="oig" /> '''The serialized, regulated firearm is the frame the printer makes, while the metal parts that contain the explosion are sold as unregulated components.'''

The Electronic Frontier Foundation argued that a scanning mandate aimed at the printer therefore misses the harder bottleneck, calling the requirement ''"an unfeasible tech solution"'' and campaigning against the New York proposal on the ground that it ''"surveils every print."''<ref name="eff" />

[[File:Glock Gen 5 Parts Diagram.jpg|thumb|In this exploded view, everything except for item number 16 is a non-regulated firearm part.]]

==Hybrid builds versus fully printed guns==

The reporting record distinguishes sharply between fully printed firearms and hybrid builds. The ''Forensic Science International: Synergy'' study recorded that, among its sample, '''the fully printed firearms appeared as seizures rather than as weapons used to wound:''' ''"Cases in which 3D-printed firearms, firearm parts and equipment were recovered by the police and law enforcement services were labelled as Seizure ... No discharged firearms were reported among them."''<ref name="forensic" />

The harm tied to printed firearms runs through hybrids. The Mangione weapon was a hybrid. So was the weaponry used in the October 9, 2019 attack on a synagogue in Halle, Germany; ''The Guardian'' described the attacker's homemade weapons as including ''"some that were 3D-printed."''<ref name="guardian" /><ref name="ctc" /> At the scale of national tracing data, the Department of Justice reported in January 2025 that ''"Between 2017 and 2023, 92,702 suspected PMFs, untraceable 'ghost guns' that are obtained without background checks and do not contain serial numbers, were recovered and reported"'' to the ATF.<ref name="doj-pmf" />

==Conversion devices==

[[File:CRW-falsepos-glock-switch.jpg|thumb|right|Glock-pattern pistols fitted with an auto-sear conversion device, in an ATF image. Federal law defines the device as a machinegun whether or not it is attached to a gun.<ref name="usc5845" />]]

The one category in this area with a large, quantified harm record is the machine-gun conversion device, and it is largely a metal-parts problem rather than a printing problem. Federal law at 26 U.S.C. § 5845(b) defines a machinegun to include ''"any part designed and intended solely and exclusively, or combination of parts designed and intended, for use in converting a weapon into a machinegun,"'' so the device itself is a machinegun whether or not it is attached to a gun.<ref name="usc5845" /> A pistol converter, often called a Glock switch, alters the fire-control geometry so the pistol fires automatically.

The ATF reported in its National Firearms Commerce and Trafficking Assessment that recoveries of conversion devices rose from 814 in the 2012 through 2016 period to 5,454 in 2017 through 2021, a 570 percent increase.<ref name="nfcta" /><ref name="nfcta-news" /> The ''Washington Post'' reported that these devices reach the street through more than one supply chain: ''"The devices can be made of metal or plastic, and authorities believe some are imported from China and sold on the streets. But 3D printers also have been used to make"'' them.<ref name="wapo" /> A 3D printer is one way to make a conversion device, not a precondition for one. New York's budget reflected the seriousness of this category by making it a class D felony, effective May 31, 2027, for a dealer or gunsmith to sell, transfer, or ship a convertible pistol, under Penal Law § 265.10(10).<ref name="bill-pdf" />

==How broadly the law defines a 3D printer==

New York's statute defines the regulated machine in two prongs, reaching ''"any machine capable of rendering a three-dimensional object from a digital design file using additive manufacturing"'' and ''"any machine capable of making three-dimensional modifications to an object from a digital design file using subtractive manufacturing."''<ref name="bill-pdf" /> Writing in ''Techdirt'', Karl Bode argued that the text as drafted would reach open-source printer firmware projects such as Marlin, Klipper, and RepRap, offline office printers, and CNC milling equipment.<ref name="techdirt" /> The breadth of the regulated category sits opposite the narrowness of what a printer contributes to a working firearm: the non-pressure-bearing frame, the part federal law already regulates.

==See also==
*[[New York 3D printer blocking technology mandate]]
*[[Right to Repair]]
*[[Digital rights management]]
*[[Digital Millennium Copyright Act]]

==References==
<references>
<ref name="gov">{{Cite web |url=https://www.governor.ny.gov/news/keeping-new-yorkers-safe-governor-hochul-signs-legislation-strengthen-public-safety-and-make |title=Keeping New Yorkers Safe: Governor Hochul Signs Legislation to Strengthen Public Safety |publisher=Office of Governor Kathy Hochul |date=2026-05-27 |access-date=2026-06-01}}</ref>
<ref name="everytown">{{Cite web |url=https://www.everytown.org/press/new-york-shuts-down-the-plastic-pipeline-governor-hochul-and-lawmakers-pass-nation-leading-measures-to-stop-the-spread-of-diy-machine-guns-and-3d-printed-firearms-in-fy27-budget/ |title=New York Shuts Down the 'Plastic Pipeline' |publisher=Everytown for Gun Safety |date=2026-05-21 |access-date=2026-06-01}}</ref>
<ref name="saami">{{Cite web |url=https://www.outdoorlife.com/guns/what-is-p-ammo/ |title=What Is +P Ammo? |author=Outdoor Life staff |publisher=Outdoor Life |date=2021-06-01 |access-date=2026-06-01}} States the SAAMI maximum average pressure of 35,000 psi for the 9mm Luger cartridge.</ref>
<ref name="smallarms">{{Cite web |url=https://www.smallarmssurvey.org/sites/default/files/resources/SAS-OP32-Behind-the-Curve.pdf |title=Behind the Curve: New Technologies, New Control Challenges (Occasional Paper 32) |author=N.R. Jenzen-Jones |publisher=Small Arms Survey |date=2015 |access-date=2026-06-01}}</ref>
<ref name="ctc">{{Cite web |url=https://ctc.westpoint.edu/printing-terror-an-empirical-overview-of-the-use-of-3d-printed-firearms-by-right-wing-extremists/ |title=Printing Terror: An Empirical Overview of the Use of 3D-Printed Firearms by Right-Wing Extremists |publisher=Combating Terrorism Center at West Point |date=2024-06 |access-date=2026-06-01}}</ref>
<ref name="forensic">{{Cite web |url=https://pmc.ncbi.nlm.nih.gov/articles/PMC10998078/ |title=The emergence of 3D printed firearms: a forensic and criminological overview |publisher=Forensic Science International: Synergy |date=2024 |access-date=2026-06-01}}</ref>
<ref name="wired">{{Cite web |url=https://www.wired.com/story/luigi-mangione-ghost-gun-built-tested/ |title=We Built the Ghost Gun Luigi Mangione Allegedly Used, and Tested It |author=Andy Greenberg |publisher=WIRED |date=2025-05-19 |access-date=2026-06-01}}</ref>
<ref name="usc921">{{Cite web |url=https://www.law.cornell.edu/uscode/text/18/921 |title=18 U.S.C. § 921, Definitions |publisher=Legal Information Institute, Cornell Law School |date=2024 |access-date=2026-06-01}}</ref>
<ref name="cfr47812">{{Cite web |url=https://www.ecfr.gov/current/title-27/chapter-II/subchapter-B/part-478/subject-group-ECFR0f9b5e597e57820/section-478.12 |title=27 CFR § 478.12, Definition of frame or receiver |publisher=Code of Federal Regulations |date=2022 |access-date=2026-06-01}}</ref>
<ref name="vanderstok">{{Cite web |url=https://www.supremecourt.gov/opinions/24pdf/23-852_c07d.pdf |title=Bondi v. VanDerStok, No. 23-852 |publisher=Supreme Court of the United States |date=2025-03-26 |access-date=2026-06-01}}</ref>
<ref name="oig">{{Cite web |url=https://apsf.assembly.ca.gov/sites/apsf.assembly.ca.gov/files/AB%201089%20PCA%20Revised%20Version%20Final%20PDF.pdf |title=Assembly Bill 1089 committee analysis (citing U.S. Department of Justice Office of the Inspector General cost estimate) |publisher=California State Assembly Committee on Public Safety |date=2023 |access-date=2026-06-01}}</ref>
<ref name="eff">{{Cite web |url=https://www.eff.org/deeplinks/2026/04/stop-new-yorks-attack-3d-printing |title=Stop New York's Attack on 3D Printing |author=Rory Mir and Nathan Sheard |publisher=Electronic Frontier Foundation |date=2026-04-16 |access-date=2026-06-01}}</ref>
<ref name="guardian">{{Cite web |url=https://www.theguardian.com/lifeandstyle/2024/dec/07/gun-control-is-dead-and-we-killed-it-firearms-that-can-be-printed-at-home |title=Gun control is dead, and we killed it: the rise of firearms that can be printed at home |publisher=The Guardian |date=2024-12-07 |access-date=2026-06-01}}</ref>
<ref name="doj-pmf">{{Cite web |url=https://www.justice.gov/archives/opa/pr/justice-department-announces-atfs-publication-final-volume-national-firearms-commerce-and |title=Justice Department Announces ATF's Publication of the Final Volume of the National Firearms Commerce and Trafficking Assessment |publisher=United States Department of Justice |date=2025-01-16 |access-date=2026-06-01}}</ref>
<ref name="usc5845">{{Cite web |url=https://www.law.cornell.edu/uscode/text/26/5845 |title=26 U.S.C. § 5845, Definitions |publisher=Legal Information Institute, Cornell Law School |date=2024 |access-date=2026-06-01}}</ref>
<ref name="nfcta">{{Cite web |url=https://www.atf.gov/firearms/national-firearms-commerce-and-trafficking-assessment-nfcta-crime-guns-volume-two |title=National Firearms Commerce and Trafficking Assessment (NFCTA): Crime Guns, Volume Two, Part III |publisher=Bureau of Alcohol, Tobacco, Firearms and Explosives |date=2023 |access-date=2026-06-01}}</ref>
<ref name="nfcta-news">{{Cite web |url=https://www.news4jax.com/news/local/2023/02/14/atf-number-of-confiscated-illegal-machine-gun-conversion-devices-jump-570-in-5-years/ |title=ATF: Number of confiscated illegal machine gun conversion devices jump 570% in 5 years |author=Erik Avanier |publisher=News4JAX (WJXT) |date=2023-02-14 |access-date=2026-06-01}} Reports the ATF NFCTA figures of 814 devices confiscated 2012 to 2016 and 5,454 in 2017 to 2021, a 570% increase.</ref>
<ref name="wapo">{{Cite web |url=https://www.washingtonpost.com/dc-md-va/2023/12/06/with-conversion-switch-devices-machine-guns-return-us-streets/ |title=With 'conversion switch' devices, machine guns return to U.S. streets |author=Tom Jackman |publisher=The Washington Post |date=2023-12-06 |archive-url=https://web.archive.org/web/20250723040301/https://www.washingtonpost.com/dc-md-va/2023/12/06/with-conversion-switch-devices-machine-guns-return-us-streets/ |archive-date=2025-07-23 |access-date=2026-06-01}}</ref>
<ref name="bill-pdf">{{Cite web |url=https://assembly.ny.gov/2026budget/2026_bills/enacted/A10005c.pdf |title=Enacted text of A. 10005-C / S. 9005-C, FY2026-2027 budget, Part C |publisher=New York State Assembly |date=2026-05-27 |access-date=2026-06-01}}</ref>
<ref name="techdirt">{{Cite web |url=https://www.techdirt.com/2026/02/19/new-yorks-new-3d-printing-law-as-written-is-extremely-harmful-and-annoying/ |title=New York's New 3D Printing Law, As Written, Is Extremely Harmful And Annoying |author=Karl Bode |publisher=Techdirt |date=2026-02-19 |access-date=2026-06-01}}</ref>
<ref name="vendor-slide">{{Cite web |url=https://www.brownells.com/gun-parts/handgun-parts/handgun-slides-parts/complete-slide-assemblies-for-glock-19/ |title=Complete Slide Assembly With Barrel for Glock 19 |publisher=Brownells |date=2026-06-02 |access-date=2026-06-02}} A complete Glock-pattern slide assembly listed at $214.99 as of June 2, 2026.</ref>
<ref name="vendor-mag">{{Cite web |url=https://www.brownells.com/gun-parts/magazines/handgun-magazines-parts/pmag-gl9-9x19-magazine-for-glock-17/ |title=Magpul PMAG GL9 9mm Magazine for Glock 17 |publisher=Brownells |date=2026-06-02 |access-date=2026-06-02}} A Glock-pattern pistol magazine listed at $14.20 as of June 2, 2026.</ref>
<ref name="vendor-firecontrol">{{Cite web |url=https://www.brownells.com/gun-parts/handgun-parts/handgun-frames-parts/lower-parts-kit-for-glock1719/ |title=Lower Parts Kit for Glock 17/19 |publisher=Brownells |date=2026-06-02 |access-date=2026-06-02}} A Glock-pattern fire-control parts kit listed at $30.99 as of June 2, 2026.</ref>
<ref name="vendor-carbontube">{{Cite web |url=https://dragonplate.com/roll-wrapped-twill-finish-round-tubes |title=Roll Wrapped Twill Finish Round Carbon Fiber Tubes |publisher=DragonPlate |date=2026-06-02 |access-date=2026-06-02}} Commercial carbon-fiber tubes listed from $38.10 as of June 2, 2026.</ref>
<ref name="vendor-ammo">{{Cite web |url=https://sgammo.com/product/9mm-luger-ammo/50-round-box-9mm-luger-124-grain-fmj-sellier-bellot-ammo-sb9b/ |title=50 Round Box 9mm Luger 124 Grain FMJ Sellier and Bellot |publisher=SGAmmo |date=2026-06-02 |access-date=2026-06-02}} A 50-round box of 9mm Luger listed at $15.95 as of June 2, 2026.</ref>
<ref name="vendor-arbarrel">{{Cite web |url=https://www.brownells.com/gun-parts/rifle-parts/rifle-barrels-parts/ |title=Rifle Barrels and Parts |publisher=Brownells |date=2026-06-02 |access-date=2026-06-02}} AR-pattern rifle barrels offered for retail sale as of June 2, 2026.</ref>
<ref name="vendor-arbcg">{{Cite web |url=https://www.brownells.com/gun-parts/rifle-parts/rifle-bolts-bolt-carrier-groups/ |title=Rifle Bolts and Bolt Carrier Groups |publisher=Brownells |date=2026-06-02 |access-date=2026-06-02}} AR-pattern bolt carrier groups offered for retail sale as of June 2, 2026.</ref>
<ref name="vendor-arupper">{{Cite web |url=https://www.brownells.com/gun-parts/rifle-parts/rifle-receivers-parts/ |title=Rifle Receivers and Parts |publisher=Brownells |date=2026-06-02 |access-date=2026-06-02}} AR-15 upper receivers offered for retail sale as of June 2, 2026.</ref>
<ref name="vendor-arbuffer">{{Cite web |url=https://www.brownells.com/gun-parts/rifle-parts/rifle-recoil-parts/ar-15m16-buffer-springs/ |title=AR-15/M16 Buffer Springs |publisher=Brownells |date=2026-06-02 |access-date=2026-06-02}} AR-15 action springs listed from $3.65 as of June 2, 2026.</ref>
<ref name="vendor-steel">{{Cite web |url=https://www.metalsdepot.com/steel-products/steel-round-bar |title=Steel Round Bar |publisher=Metals Depot |date=2026-06-02 |access-date=2026-06-02}} A36 steel round bar stock sold cut to length as of June 2, 2026.</ref>
</references>

File:Glock Gen 5 Parts Diagram.jpg

2026-06-03T06:01:54Z

Hellreaver:

In this exploded view, everything except for item number 16 is a non-regulated firearm part.

Talk:Starlink

2026-05-16T19:42:59Z

Hellreaver: /* Starlink Price Increase, mini VS everyone */ new section

== Starlink Price Increase, mini VS everyone ==

As far as I can tell, everyone recieved the increase to $10/mo for standby mode. I bought the full sized dish outright and still got the price hike email May 16, 2026, 6:12 AM. [[User:Hellreaver|Hellreaver]] ([[User talk:Hellreaver|talk]]) 19:42, 16 May 2026 (UTC)