UltiMaker - Revision history

Sojourna: /* Incidents */ Clean-up.

2026-06-02T01:58:51Z

Incidents: Clean-up.

← Older revision		Revision as of 01:58, 2 June 2026
Line 14:		Line 14:

	==Incidents==		==Incidents==
	~~{{Ph-C-Inc}}~~

	This is a list of all consumer-protection incidents this company is involved in. Any incidents not mentioned here can be found in the [[:Category:{{FULLPAGENAME}}\|{{PAGENAME}} category]].		This is a list of all consumer-protection incidents this company is involved in. Any incidents not mentioned here can be found in the [[:Category:{{FULLPAGENAME}}\|{{PAGENAME}} category]].

	===UltiMaker Cloud/Digital Factory requirement for 3D printers===		===UltiMaker Cloud/Digital Factory requirement for 3D printers===
	UltiMaker's only way of networking the UltiMaker 2+ Connect (and possibly the UltiMaker 3) is through UltiMaker Cloud/Digital Factory. This means if UltiMaker Cloud goes down, ~~you~~ cannot remotely manage ~~your~~ UltiMaker printers.{{~~Cite~~}} UltiMaker's solution is that you "use a USB to print" however this is time consuming as you have to wait up to 10 minutes for the file to be transferred from the USB to the printer's internal SD card. It also makes using these printers in a school network where there is a firewall that could be blocking UltiMaker's services ~~a lot harder~~. There is no LAN control for these printers. Many members in the UltiMaker community forums have discussed their issues with Digital Factory, and a reply from a forum moderator is to "print using flash drives." <ref>{{Cite web \|~~date~~=~~2025-10-31~~ \|title="Digital Factory problems~~" from the official UltiMaker community forums~~ \|url=https://community.ultimaker.com/topic/47279-digital-factory-problems/ \|url-status=live \|~~access~~-~~date~~=~~2026~~-06-01 \|~~website~~=~~Digital Factory problems - UltiMaker Digital Factory - UltiMaker Community of 3D Printing Experts~~}}</ref>		UltiMaker's only way of networking the UltiMaker 2+ Connect (and possibly the UltiMaker 3) is through UltiMaker Cloud/Digital Factory. This means if UltiMaker Cloud goes down, the user cannot remotely manage their UltiMaker printers.{{Citation needed}} UltiMaker's solution is that you "use a USB to print" however this is time-consuming as you have to wait up to ten minutes for the file to be transferred from the USB to the printer's internal SD card. It also makes using these printers in a school network much more difficult, where there is a firewall that could be blocking UltiMaker's services. There is no LAN control for these printers. Many members in the UltiMaker community forums have discussed their issues with Digital Factory, and a reply from a forum moderator is to "print using flash drives."<ref>{{Cite web \|author=gr5 \|title=Digital Factory problems \|url=https://community.ultimaker.com/topic/47279-digital-factory-problems/#comment-344419 \|website=Ultimaker \|date=31 Oct 2025 \|access-date=1 Jun 2026 \|url-status=live \|archive-url=https://web.archive.org/web/20260602015533/https://community.ultimaker.com/topic/47279-digital-factory-problems/ \|archive-date=2 Jun 2026}}</ref>

	~~===Example incident two (''date'')===~~
	~~...~~

	==Products==		==Products==

Sirnano: Added citation from the UltiMaker community forums

2026-06-01T00:16:48Z

Added citation from the UltiMaker community forums

← Older revision		Revision as of 00:16, 1 June 2026
Line 19:		Line 19:

	===UltiMaker Cloud/Digital Factory requirement for 3D printers===		===UltiMaker Cloud/Digital Factory requirement for 3D printers===
	UltiMaker's only way of networking the UltiMaker 2+ Connect (and possibly the UltiMaker 3) is through UltiMaker Cloud/Digital Factory. This means if UltiMaker Cloud goes down, you cannot remotely manage your UltiMaker printers.{{Cite}} UltiMaker's solution is that you "use a USB to print" however this is time consuming as you have to wait up to 10 minutes for the file to be transferred from the USB to the printer's internal SD card. It also makes using these printers in a school network where there is a firewall that could be blocking UltiMaker's services a lot harder. There is no LAN control for these printers.		UltiMaker's only way of networking the UltiMaker 2+ Connect (and possibly the UltiMaker 3) is through UltiMaker Cloud/Digital Factory. This means if UltiMaker Cloud goes down, you cannot remotely manage your UltiMaker printers.{{Cite}} UltiMaker's solution is that you "use a USB to print" however this is time consuming as you have to wait up to 10 minutes for the file to be transferred from the USB to the printer's internal SD card. It also makes using these printers in a school network where there is a firewall that could be blocking UltiMaker's services a lot harder. There is no LAN control for these printers. Many members in the UltiMaker community forums have discussed their issues with Digital Factory, and a reply from a forum moderator is to "print using flash drives." <ref>{{Cite web \|date=2025-10-31 \|title="Digital Factory problems" from the official UltiMaker community forums \|url=https://community.ultimaker.com/topic/47279-digital-factory-problems/ \|url-status=live \|access-date=2026-06-01 \|website=Digital Factory problems - UltiMaker Digital Factory - UltiMaker Community of 3D Printing Experts}}</ref>

	===Example incident two (''date'')===		===Example incident two (''date'')===

Sojourna at 04:14, 5 April 2026

2026-04-05T04:14:42Z

← Older revision		Revision as of 04:14, 5 April 2026
Line 3:		Line 3:
	\|Founded=2011		\|Founded=2011
	\|Industry=3D printing		\|Industry=3D printing
	\|Logo=~~New ultimaker~~ logo.png		\|Logo=Ultimaker new logo.png
	\|Website=https://ultimaker.com		\|Website=https://ultimaker.com
	\|Description=UltiMaker is a 3D printer manufacturing company based in the Netherlands, with offices and assembly lines in the US.		\|Description=UltiMaker is a 3D printer manufacturing company based in the Netherlands, with offices and assembly lines in the US.
	}}Ultimaker is a 3D printer manufacturing company based in the Netherlands, with offices and assembly lines in the US. They make fused filament fabrication 3D printers, develop 3D printing software, and sell branded 3D printing materials.		}}

	==Consumer-impact summary==		'''UltiMaker''' is a 3D printer manufacturing company based in the Netherlands, with offices and assembly lines in the US. They make fused filament fabrication 3D printers, develop 3D printing software, and sell branded 3D printing materials.

			==Consumer impact summary==
	{{Ph-C-CIS}}		{{Ph-C-CIS}}

	==Incidents==		==Incidents==
	{{Ph-C-Inc}}		{{Ph-C-Inc}}

	This is a list of all consumer-protection incidents this company is involved in. Any incidents not mentioned here can be found in the [[:Category:{{FULLPAGENAME}}\|{{PAGENAME}} category]].		This is a list of all consumer-protection incidents this company is involved in. Any incidents not mentioned here can be found in the [[:Category:{{FULLPAGENAME}}\|{{PAGENAME}} category]].

	===UltiMaker Cloud/Digital Factory requirement for 3D printers===		===UltiMaker Cloud/Digital Factory requirement for 3D printers===
	UltiMaker's only way of networking the UltiMaker 2+ Connect (and possibly the UltiMaker 3) is through UltiMaker Cloud/Digital Factory. This means if UltiMaker Cloud goes down, you cannot remotely manage your UltiMaker printers.{{Cite}} UltiMaker's solution is that you "use a USB to print" however this is time consuming as you have to wait up to 10 minutes for the file to be transferred from the USB to the printer's internal SD card. It also makes using these printers in a school network where there is a firewall that could be blocking UltiMaker's services a lot harder. There is no LAN control for these printers.		UltiMaker's only way of networking the UltiMaker 2+ Connect (and possibly the UltiMaker 3) is through UltiMaker Cloud/Digital Factory. This means if UltiMaker Cloud goes down, you cannot remotely manage your UltiMaker printers.{{Cite}} UltiMaker's solution is that you "use a USB to print" however this is time consuming as you have to wait up to 10 minutes for the file to be transferred from the USB to the printer's internal SD card. It also makes using these printers in a school network where there is a firewall that could be blocking UltiMaker's services a lot harder. There is no LAN control for these printers.
Line 27:		Line 31:

	==References==		==References==
	{{~~reflist~~}}		{{Reflist}}

	[[Category:{{PAGENAME}}]]		[[Category:{{PAGENAME}}]]

Mr Pollo: needs sources, or else might be removed for original research

2026-03-28T00:13:46Z

needs sources, or else might be removed for original research

← Older revision		Revision as of 00:13, 28 March 2026
Line 1:		Line 1:
			{{Stub}}
	{{CompanyCargo		{{CompanyCargo
	\|Founded=2011		\|Founded=2011
Line 8:		Line 9:

	==Consumer-impact summary==		==Consumer-impact summary==
			{{Ph-C-CIS}}
	~~===UltiMaker Cloud/Digital Factory requirement for 3D printers===~~
	UltiMaker's only way of networking the UltiMaker 2+ Connect (and possibly the UltiMaker 3) is through UltiMaker Cloud/Digital Factory. This means if UltiMaker Cloud goes down, you cannot remotely manage your UltiMaker printers. UltiMaker's solution is that you "use a USB to print" however this is time consuming as you have to wait up to 10 minutes for the file to be transferred from the USB to the printer's internal SD card. It also makes using these printers in a school network where there is a firewall that could be blocking UltiMaker's services a lot harder. There is no LAN control for these printers.

	==Incidents==		==Incidents==
	{{Ph-C-Inc}}		{{Ph-C-Inc}}

	This is a list of all consumer-protection incidents this company is involved in. Any incidents not mentioned here can be found in the [[:Category:{{FULLPAGENAME}}\|{{PAGENAME}} category]].		This is a list of all consumer-protection incidents this company is involved in. Any incidents not mentioned here can be found in the [[:Category:{{FULLPAGENAME}}\|{{PAGENAME}} category]].
	===~~Example incident one (''date'')~~===		===UltiMaker Cloud/Digital Factory requirement for 3D printers===
	{{~~Main\|link to the main CR Wiki article~~}}		UltiMaker's only way of networking the UltiMaker 2+ Connect (and possibly the UltiMaker 3) is through UltiMaker Cloud/Digital Factory. This means if UltiMaker Cloud goes down, you cannot remotely manage your UltiMaker printers.{{Cite}} UltiMaker's solution is that you "use a USB to print" however this is time consuming as you have to wait up to 10 minutes for the file to be transferred from the USB to the printer's internal SD card. It also makes using these printers in a school network where there is a firewall that could be blocking UltiMaker's services a lot harder. There is no LAN control for these printers.
	~~Short summary of~~ the ~~incident (could~~ be the ~~same as~~ the ~~summary preceding the article)~~.
	===Example incident two (''date'')===		===Example incident two (''date'')===
	...		...

Sirnano: Added summary from Wikipedia

2026-03-21T13:15:42Z

Added summary from Wikipedia

← Older revision		Revision as of 13:15, 21 March 2026
Line 5:		Line 5:
	\|Website=https://ultimaker.com		\|Website=https://ultimaker.com
	\|Description=UltiMaker is a 3D printer manufacturing company based in the Netherlands, with offices and assembly lines in the US.		\|Description=UltiMaker is a 3D printer manufacturing company based in the Netherlands, with offices and assembly lines in the US.
	}}		}}Ultimaker is a 3D printer manufacturing company based in the Netherlands, with offices and assembly lines in the US. They make fused filament fabrication 3D printers, develop 3D printing software, and sell branded 3D printing materials.
	~~{{Ph-C-Int}}~~

	==Consumer-impact summary==		==Consumer-impact summary==

	=== UltiMaker Cloud/Digital Factory requirement for 3D printers ===		===UltiMaker Cloud/Digital Factory requirement for 3D printers===
	UltiMaker's only way of networking the UltiMaker 2+ Connect (and possibly the UltiMaker 3) is through UltiMaker Cloud/Digital Factory. This means if UltiMaker Cloud goes down, you cannot remotely manage your UltiMaker printers. UltiMaker's solution is that you "use a USB to print" however this is time consuming as you have to wait up to 10 minutes for the file to be transferred from the USB to the printer's internal SD card. It also makes using these printers in a school network where there is a firewall that could be blocking UltiMaker's services a lot harder. There is no LAN control for these printers.		UltiMaker's only way of networking the UltiMaker 2+ Connect (and possibly the UltiMaker 3) is through UltiMaker Cloud/Digital Factory. This means if UltiMaker Cloud goes down, you cannot remotely manage your UltiMaker printers. UltiMaker's solution is that you "use a USB to print" however this is time consuming as you have to wait up to 10 minutes for the file to be transferred from the USB to the printer's internal SD card. It also makes using these printers in a school network where there is a firewall that could be blocking UltiMaker's services a lot harder. There is no LAN control for these printers.

Sirnano: Added cloud requirement info

2026-03-18T00:20:44Z

Added cloud requirement info

← Older revision		Revision as of 00:20, 18 March 2026
Line 9:		Line 9:

	==Consumer-impact summary==		==Consumer-impact summary==
	~~{{Ph-C-CIS}}~~
			=== UltiMaker Cloud/Digital Factory requirement for 3D printers ===
			UltiMaker's only way of networking the UltiMaker 2+ Connect (and possibly the UltiMaker 3) is through UltiMaker Cloud/Digital Factory. This means if UltiMaker Cloud goes down, you cannot remotely manage your UltiMaker printers. UltiMaker's solution is that you "use a USB to print" however this is time consuming as you have to wait up to 10 minutes for the file to be transferred from the USB to the printer's internal SD card. It also makes using these printers in a school network where there is a firewall that could be blocking UltiMaker's services a lot harder. There is no LAN control for these printers.

	==Incidents==		==Incidents==

Sirnano: Created page with "{{CompanyCargo |Founded=2011 |Industry=3D printing |Logo=New ultimaker logo.png |Website=https://ultimaker.com |Description=UltiMaker is a 3D printer manufacturing company based in the Netherlands, with offices and assembly lines in the US. }} {{Ph-C-Int}} ==Consumer-impact summary== {{Ph-C-CIS}} ==Incidents== {{Ph-C-Inc}} This is a list of all consumer-protection incidents this company is involved in. Any incidents not mentioned here can be found in the :Ca..."

2026-03-17T23:57:39Z

Created page with "{{CompanyCargo |Founded=2011 |Industry=3D printing |Logo=New ultimaker logo.png |Website=https://ultimaker.com |Description=UltiMaker is a 3D printer manufacturing company based in the Netherlands, with offices and assembly lines in the US. }} {{Ph-C-Int}} ==Consumer-impact summary== {{Ph-C-CIS}} ==Incidents== {{Ph-C-Inc}} This is a list of all consumer-protection incidents this company is involved in. Any incidents not mentioned here can be found in the :Ca..."

New page

{{CompanyCargo
|Founded=2011
|Industry=3D printing
|Logo=New ultimaker logo.png
|Website=https://ultimaker.com
|Description=UltiMaker is a 3D printer manufacturing company based in the Netherlands, with offices and assembly lines in the US.
}}
{{Ph-C-Int}}

==Consumer-impact summary==
{{Ph-C-CIS}}

==Incidents==
{{Ph-C-Inc}}

This is a list of all consumer-protection incidents this company is involved in. Any incidents not mentioned here can be found in the [[:Category:{{FULLPAGENAME}}|{{PAGENAME}} category]].
===Example incident one (''date'')===
{{Main|link to the main CR Wiki article}}
Short summary of the incident (could be the same as the summary preceding the article).
===Example incident two (''date'')===
...

==Products==
{{Ph-C-P}}

==See also==
{{Ph-C-SA}}

==References==
{{reflist}}

[[Category:{{PAGENAME}}]]