HP Ink Cartridge ID Chip Swap Guide: Difference between revisions

(3 intermediate revisions by one other user not shown)

Line 1:

This article contains a guide on how to remove ID chips from OEM HP inkjet printer cartridges and install them on dimensionally identical cartridges of different model numbers, or third-party and refillable cartridges. The guides here do not cover all HP cartridge models, so if there's a working method for another family of cartridges, please add it here.

This article contains a guide on how to remove ID chips from OEM HP inkjet printer cartridges and install them on dimensionally identical cartridges of different model numbers, or third-party and refillable cartridges. This allows them to be installed in otherwise incompatible printers.

The guides here do not cover all HP cartridge models, so if there's a working method for another family of cartridges, please add it here.

=564, 902, 920, and 935 cartridges=

Line 16:

Line 18:

In this example I am going to be using a yellow 902 XL cartridge as my donor and a yellow third party 564 XL cartridge as my recipient. Note how both cartridges are dimensionally identical, despite the difference in name.

[[File:Cartcompare.jpg~~|left~~|thumb|~~663x663px~~|OEM HP 902 XL vs Third-party 564 XL]]

[[File:Cartcompare.jpg|thumb|660x660px|OEM HP 902 XL vs Third-party 564 XL|none]]

~~'''TODO: Add images'''~~

===Step 1===

Flip your ~~doner~~ cartridge over and using the rotary tool, start cutting off the bottom section the cartridge around chip as shown. You may have some residual ink come out so I'd advise wearing gloves for this.

Flip your donor cartridge over and using the rotary tool, start cutting off the bottom section the cartridge around chip as shown. You may have some residual ink come out so I'd advise wearing gloves for this.

[[File:Cartcut.jpg|none|thumb|660x660px]]

===Step 2===

Once you get the piece out, try to gently bend the plastic underneath the chip in order to separate it. If you can't bend it, use the rotary tool to whittle away a little more plastic under the chip before trying again.

If done properly, the plastic should bend away from the chip~~, allowing you enough room~~ to free ~~it from~~ the adhesive ~~using your hobby knife~~. If the chip still has the little black bead on it's underside intact, it was extracted successfully.

If done properly, the plastic should bend away from the chip. You can use your hobby knife to help free up the adhesive, but '''absolutely do not try prying on the chip itself''' - it will break.

If the chip still has the little black bead on it's underside intact, it was extracted successfully.

[[File:Chipremoval.jpg|none|thumb|660x660px]]

===Step 3===

Now to prepare the recipient cartridge. Depending on what you bought, it may or may not have a chip already pre-installed on it. My third-party 564 XL cartridge already has an incompatible chip on it, so I just pried it out with my hobby knife.

[[File:20250122 172430.jpg|none|thumb|330x330px]]

===Step 4===

Take a small amount of double sided tape (or your adhesive of choice) and stick the ~~doner~~ chip in the proper position on the recipient cartridge. Make sure it is oriented correctly, and not sticking out from the surface an unreasonable amount.

Take a small amount of double sided tape (or your adhesive of choice) and stick the donor chip in the proper position on the recipient cartridge. Make sure it is oriented correctly, and not sticking out from the surface an unreasonable amount.

[[File:Chipinstalled.jpg|none|thumb|330x330px]]

===Step 5===

Line 52:

Line 45:

Now your printer is unshackled from HP's ink cartridge scam. Enjoy!

[[File:Cartloaded.jpg|none|thumb|660x660px]]

[[Category:HP Inc.]]

@@ Line 1: / Line 1: @@
 {{GuideNotice}}
-This article contains a guide on how to remove ID chips from OEM HP inkjet printer cartridges and install them on dimensionally identical cartridges of different model numbers, or third-party and refillable cartridges. The guides here do not cover all HP cartridge models, so if there's a working method for another family of cartridges, please add it here.
+This article contains a guide on how to remove ID chips from OEM HP inkjet printer cartridges and install them on dimensionally identical cartridges of different model numbers, or third-party and refillable cartridges. This allows them to be installed in otherwise incompatible printers.
+The guides here do not cover all HP cartridge models, so if there's a working method for another family of cartridges, please add it here.
 =564, 902, 920, and 935 cartridges=
@@ Line 16: / Line 18: @@
 In this example I am going to be using a yellow 902 XL cartridge as my donor and a yellow third party 564 XL cartridge as my recipient. Note how both cartridges are dimensionally identical, despite the difference in name.
-[[File:Cartcompare.jpg|left|thumb|663x663px|OEM HP 902 XL vs Third-party 564 XL]]
+[[File:Cartcompare.jpg|thumb|660x660px|OEM HP 902 XL vs Third-party 564 XL|none]]
-'''TODO: Add images'''
 ===Step 1===
-Flip your doner cartridge over and using the rotary tool, start cutting off the bottom section the cartridge around chip as shown. You may have some residual ink come out so I'd advise wearing gloves for this.
+Flip your donor cartridge over and using the rotary tool, start cutting off the bottom section the cartridge around chip as shown. You may have some residual ink come out so I'd advise wearing gloves for this.
+[[File:Cartcut.jpg|none|thumb|660x660px]]
 ===Step 2===
 Once you get the piece out, try to gently bend the plastic underneath the chip in order to separate it. If you can't bend it, use the rotary tool to whittle away a little more plastic under the chip before trying again.
-If done properly, the plastic should bend away from the chip, allowing you enough room to free it from the adhesive using your hobby knife. If the chip still has the little black bead on it's underside intact, it was extracted successfully.
+If done properly, the plastic should bend away from the chip. You can use your hobby knife to help free up the adhesive, but '''absolutely do not try prying on the chip itself''' - it will break.
+If the chip still has the little black bead on it's underside intact, it was extracted successfully.
+[[File:Chipremoval.jpg|none|thumb|660x660px]]
 ===Step 3===
 Now to prepare the recipient cartridge. Depending on what you bought, it may or may not have a chip already pre-installed on it. My third-party 564 XL cartridge already has an incompatible chip on it, so I just pried it out with my hobby knife.
+[[File:20250122 172430.jpg|none|thumb|330x330px]]
 ===Step 4===
-Take a small amount of double sided tape (or your adhesive of choice) and stick the doner chip in the proper position on the recipient cartridge. Make sure it is oriented correctly, and not sticking out from the surface an unreasonable amount.
+Take a small amount of double sided tape (or your adhesive of choice) and stick the donor chip in the proper position on the recipient cartridge. Make sure it is oriented correctly, and not sticking out from the surface an unreasonable amount.
+[[File:Chipinstalled.jpg|none|thumb|330x330px]]
 ===Step 5===
@@ Line 52: / Line 45: @@
 Now your printer is unshackled from HP's ink cartridge scam. Enjoy!
+[[File:Cartloaded.jpg|none|thumb|660x660px]]
 [[Category:HP Inc.]]