Editing Futotemporarywikipage (section)

=== Step 4: Apply the New Configuration ===

Now that the configuration is ready, apply it.

<ol style="list-style-type: decimal;">
<li><p>Run the following command to apply the new Netplan configuration:</p>
<pre>sudo netplan apply</pre>
<blockquote><p>'''NOTE:''' You may make an error because yaml files are evil; to make sure the configuration works, run <code>netplan try</code> before running <code>netplan apply</code>. While yoda had a point with the ''“do or not do there is no try”'', he never dealt with linux documentation.</p></blockquote></li>
<li><p>Verify that the bridge interface is up and has the correct configuration by running this command:</p>
<pre>ip addr show br0</pre></li>
<li><p>You should see that <code>br0</code> has the IP address '''192.168.5.2'''.</p></li>
<li><p>Check the routing table to make sure that the default route is correctly set by running:</p>
<pre>ip route show</pre></li>
<li><p>Verify that the default route points to '''192.168.5.1'''.</p></li></ol>

<span id="step-5-test-network-configuration"></span>