Editing Steelseries Aerox 3 Lightweight Gaming Mouse (section)

==The fixes found for this device:==



If you are experiencing an aerox 3 that has started autoclicking a year after you bought it:<blockquote>"First Factory Reset the mouse, you can do this by holding down left and right mouse button while holding down the cpi button, with all three of those buttons held down, unplug and re-plug the mouse, if done right, the mouse will blink, red-blue for me. while the mouse is in its reset mode, uninstall steelseries.gg entirely. if you have a second non steelseries mouse laying around. plug it in to your computer. then, with that mouse plugged in, unplug and replug your aerox mouse. then go into your device drivers control panel while both mice are still plugged in. make sure just to update drivers if need be. after drivers are updated, you should be good to unplug the stand-in mouse and your aerox should retain its led and cpi settings as they were last set in the steelseries firmware. and your aerox 3 will just work now even after a system reboot. "</blockquote>This fix may also work for other firmware issues, if you have run out of options, try this fix, and please add the fix for your scenario if it worked for you.{{Main|https://linustechtips.com/topic/1586506-steel-series-aerox-3-firmware-issues-fix}}