HP Ink Cartridge ID Chip Swap Guide: Difference between revisions

@@ Line 20: / Line 20: @@
 [[File:Cartcompare.jpg|thumb|660x660px|OEM HP 902 XL vs Third-party 564 XL|none]]
 ===Step 1===
-Flip your doner cartridge over and using the rotary tool, start cutting off the bottom section the cartridge around chip as shown. You may have some residual ink come out so I'd advise wearing gloves for this.
+Flip your donor cartridge over and using the rotary tool, start cutting off the bottom section the cartridge around chip as shown. You may have some residual ink come out so I'd advise wearing gloves for this.
 [[File:Cartcut.jpg|none|thumb|660x660px]]
@@ Line 36: / Line 36: @@
 ===Step 4===
-Take a small amount of double sided tape (or your adhesive of choice) and stick the doner chip in the proper position on the recipient cartridge. Make sure it is oriented correctly, and not sticking out from the surface an unreasonable amount.
+Take a small amount of double sided tape (or your adhesive of choice) and stick the donor chip in the proper position on the recipient cartridge. Make sure it is oriented correctly, and not sticking out from the surface an unreasonable amount.
 [[File:Chipinstalled.jpg|none|thumb|330x330px]]