Wallbox Quasar

This article is a very slow work in progress. Please feel free to add suggestions.

Wallbox Quasar

Basic Information
Release Year
Product Type	Hardware
In Production	No
Official Website	https://wallbox.com/

An introductory paragraph starting with "Wallbox Quasar is a ...". When writing the article, insert text in the space below this box, and then delete this tip box (and the other tip boxes below). In the visual editor, just click on a box and press backspace to delete it. In the source editor, simply delete the double curly brackets, and the text inside them.

---

Add your text below this box. Once this section is complete, delete this box by clicking on it and pressing backspace.

The Quasar (not to be confused with the Quasar 2) is a DC Vehicle to Grid (V2G) electric car charger with a CHAdeMO connector. It is rated to charge or discharge a car at 7kW.

There is an official app to monitor and control the charger. The app can connect directly via Bluetooth, or indirectly over the internet if the charger is connected via Ethernet or Wi-Fi. The charger also has hand gesture recognition, and can be automated using a modified version of OCPP 1.6 .

Consumer-impact summary

Overview of concerns that arise from the conduct towards users of the product (if applicable):

• User Freedom
• User Privacy
• Business Model
• Market Control

---

Add your text below this box. Once this section is complete, delete this box by clicking on it and pressing backspace.

In the event that something malfunctions and the charger needs to be reset, there is a restart button and a factory reset button in the app. If the app is unable to connect to the charger, and power cycling the charger does not fix it, there are 2 reset buttons inside the unit.

---Reference needed---

Wallbox decided not to provide instructions to reset the charger, and instead stated that a qualified technician would need to perform the reset procedure. The reset procedure involves removing and disassembling the display unit to access the 2 reset buttons inside, then re-attaching the disassembled display unit to the charger.

Once the opened display unit is attached to the charger and the charger is powered:

• Press and hold both buttons at the same time
• Wait 3 seconds then release the button labeled "RST"
• Wait 10 seconds then release the other button

Any other combination of button pressing or holding will have no effect.

Incidents

Add one-paragraph summaries of incidents below in sub-sections, which link to each incident's main article while linking to the main article and including a short summary. It is acceptable to create an incident summary before the main page for an incident has been created. To link to the page use the "Hatnote" or "Main" templates.

If the company has numerous incidents then format them in a table (see Amazon for an example).

---

Add your text below this box. Once this section is complete, delete this box by clicking on it and pressing backspace.

This is a list of all consumer-protection incidents related to this product line. Any incidents not mentioned here can be found in the Wallbox Quasar category.

Example incident one (date)

Main article: link to the main CR Wiki article

Short summary of the incident (could be the same as the summary preceding the article).

Example incident two (date)

...

Products

This is a list of the company's product lines with articles on this wiki.

• Example product line one (release date): Short summary of the product's incidents.
• Example product line two (release date):

---

Add your text below this box. Once this section is complete, delete this box by clicking on it and pressing backspace.

See also

Link to relevant theme articles or companies with similar incidents.

---

Add your text below this box. Once this section is complete, delete this box by clicking on it and pressing backspace.